APC AP9268 manual ID Window

Page 24

On-Screen Display Operations

4.5 The ID Window

The ID Window appears when you change channels and displays the name of the selected channel. This window can be individually conﬁgured for each channel in your system. The characteristics of the ID Window can be changed from the Edit Channel Menu. This option is only available if you are operating in non-secure mode or if you are the system administrator.

Changing the Size, Color and Position of the ID Window

1.Highlight the channel you wish to change in the main OSD Window.

2.FromthemainOSDWindow,presstheControlkeytwicetoaccesstheCommand Menu or press F3. (If you press F3, skip Step 3.)

3.Select ‘Edit Channel’ from the Command Menu.

4.Choose the option ‘ID Setup.’

Follow the procedures outlined in the table below to change the size, color or position of your ID Window.

Operation	Procedure

Move the ID Window	Use the arrow keys or mouse to move the ID
	Window's position on the monitor. (Hold down
	the SHIFT key to move faster.) If the window
	ﬂickers but does not move, continue tapping the
	arrow keys until it moves back into range.

Change window	Press the <PAGE UP> key to cycle through
background color	the available window background colors.

Change text color	Press the <PAGE DOWN> key to cycle through
	the available text colors.

Change window length	Use the (+) and (-) keys to change the length of
	the ID Window.
Change window size	Press SPACE to toggle between large and small.

ID Window Help	Press F1

19

Image 24

Contents APC KVM Switch For use in the United States EnglishFCC Statement Canadian Department of Communications StatementRack Mount Safety Considerations APC KVM Switch Installer/User Guide Table of Contents Product Overview Feature Overview MultiplatformPlug and play Push-button & keyboard switching CompatibilityBasic Installation Connecting your Local PeripheralsConnecting your Remote Peripherals If you are using Remote PS/2 peripheralsCable Description Length Connecting Computers to the APC KVM Switch APC KVM Switch Installer/User Guide Advanced Install Attaching Multiple Switch UnitsBasic Operations- Overview Keyboard Control ESCKeyboard Switching Key Sequence ActionSystem Control and Maintenance Key Sequence ActionOn-Screen Display Operations Activating OSD APC KVM Switch OSD WindowCommand Menu Basic Channel Maintenance Editing Channel Names and Addresses Deleting an Existing ChannelID Window Setting the ID Window Dwell Time Administrator Functions Differences between Secure and Non-Secure Operating ModesCreating the Administrator Account Setting Up Additional UsersSwitch Selection Setup Port OperationsFlash Upgrades Remote UserIndependent Access Advanced Operation- Multiuser OperationShared Access Multi Chassis OperationIndependent Access Options Keyboard Translation PS/2 Keyboard to Sun ComputerAPC KVM Switch Installer/User Guide Channel Scanning Choosing a scan method Turning Scanning On and Off From the OSD menuWith the Scan Button Scanning by List To add a channel to the Scan ListTo delete a channel from the Scan List Power SpeciﬁcationsSpeciﬁcations for Remote User Receiver AP9279 Flash Upgrading Appendices Troubleshooting Try going into command mode again. If APC KVM Switch Installer/User Guide Appendices APC KVM Switch Installer/User Guide If Problems Persist Limited Warranty Life Support Policy General policy Examples of life-support devicesAPC Worldwide Customer Support