APC AP9268 manual Appendices

Page 40

Appendices

Conﬁgure your terminal program to the following settings:

38,400 Baud

8Bits No Parity 1 Stop Bit

No Flow Control

Activate the OSD menu on your APC KVM Switch by tapping the Control key twice. Enter Control twice more to activate the Administrator Commands screen and then select Administrator Functions.

Use the down arrow key to highlight the menu selection for FLASH Upgrade, then hit Enter.

A menu screen will appear and ask if you wish to continue. You must type out the word ‘Yes’ before proceeding. Once you have done this, the Switch will go into a standby mode and wait for data from the computer. (Note: The keyboard, video and mouse are disabled during the FLASH upgrade.)

The ﬁnal step is to send the FLASH ﬁle from your terminal program. To do this, you will need to use the transfer function of your communications software. Send the FLASH ﬁle using the XMODEM protocol. The transfer should be completed within four minutes.

The APC KVM Switch will automatically check the upgrade and make sure that it is valid. If the Switch detects an error it will abort the upgrade and prompt you to re-transfer the ﬁle. Otherwise, it will return the message “Flash Upgrade Successful”.

35

Image 40

Contents APC KVM Switch For use in the United States EnglishFCC Statement Canadian Department of Communications StatementRack Mount Safety Considerations APC KVM Switch Installer/User Guide Table of Contents Product Overview Feature Overview MultiplatformPlug and play Push-button & keyboard switching CompatibilityBasic Installation Connecting your Local PeripheralsConnecting your Remote Peripherals If you are using Remote PS/2 peripheralsCable Description Length Connecting Computers to the APC KVM Switch APC KVM Switch Installer/User Guide Advanced Install Attaching Multiple Switch UnitsBasic Operations- Overview Keyboard Control ESCKeyboard Switching Key Sequence ActionSystem Control and Maintenance Key Sequence ActionOn-Screen Display Operations Activating OSD APC KVM Switch OSD WindowCommand Menu Basic Channel Maintenance Editing Channel Names and Addresses Deleting an Existing ChannelID Window Setting the ID Window Dwell Time Administrator Functions Differences between Secure and Non-Secure Operating ModesCreating the Administrator Account Setting Up Additional UsersSwitch Selection Setup Port OperationsFlash Upgrades Remote UserIndependent Access Advanced Operation- Multiuser OperationShared Access Multi Chassis OperationIndependent Access Options Keyboard Translation PS/2 Keyboard to Sun ComputerAPC KVM Switch Installer/User Guide Channel Scanning Choosing a scan method From the OSD menu Turning Scanning On and OffWith the Scan Button To add a channel to the Scan List Scanning by ListTo delete a channel from the Scan List Power SpeciﬁcationsSpeciﬁcations for Remote User Receiver AP9279 Flash Upgrading Appendices Troubleshooting Try going into command mode again. If APC KVM Switch Installer/User Guide Appendices APC KVM Switch Installer/User Guide If Problems Persist Limited Warranty Life Support Policy General policy Examples of life-support devicesAPC Worldwide Customer Support