APC AP9268 manual Turning Scanning On and Off, From the OSD menu, With the Scan Button

Page 35

APC KVM Switch Installer/User Guide

6.2 Turning Scanning On and Off

From the OSD menu.

1.From the main OSD Window, press the Control key twice to access the Command Menu.

2.Toggle ‘Scanning is OFF’, ‘Scanning by Name’, ‘Scanning by Address’ or ‘Scanning by List’ from the menu. This is a toggle option - only one scanning option will show on the menu at any one time.

Selecting ‘by Name’ will scan channels alphanumerically by name, ‘by Address’ will scan channels numerically by channel address.

3.Press Enter.

With the Scan Button

1.You may initiate scanning by address by pressing and holding the Scan push-button until the SCAN LED lights green.

2.Scanning may be halted if a channel is selected, or if the Scan push-button is pressed again.

By keyboard hot-key sequence

The following key sequences control scanning.

Key Sequence

Action

<CM>SG<Enter>

Enables the scan Go command. (By Address Only)

<CM>SH<Enter>

Enables the scan Halt command.

30

Image 35

Contents For use in the United States English APC KVM SwitchCanadian Department of Communications Statement FCC StatementRack Mount Safety Considerations APC KVM Switch Installer/User Guide Table of Contents Multiplatform Product Overview Feature OverviewPlug and play Compatibility Push-button & keyboard switchingConnecting your Local Peripherals Basic InstallationIf you are using Remote PS/2 peripherals Connecting your Remote PeripheralsCable Description Length Connecting Computers to the APC KVM Switch APC KVM Switch Installer/User Guide Attaching Multiple Switch Units Advanced InstallBasic Operations- Overview ESC Keyboard ControlKey Sequence Action Keyboard SwitchingKey Sequence Action System Control and MaintenanceOn-Screen Display Operations Activating OSD OSD Window APC KVM SwitchCommand Menu Basic Channel Maintenance Deleting an Existing Channel Editing Channel Names and AddressesID Window Setting the ID Window Dwell Time Differences between Secure and Non-Secure Operating Modes Administrator FunctionsSetting Up Additional Users Creating the Administrator AccountRemote User Switch SelectionSetup Port Operations Flash UpgradesAdvanced Operation- Multiuser Operation Independent AccessMulti Chassis Operation Shared AccessIndependent Access Options PS/2 Keyboard to Sun Computer Keyboard TranslationAPC KVM Switch Installer/User Guide Channel Scanning Choosing a scan method With the Scan Button Turning Scanning On and OffFrom the OSD menu To delete a channel from the Scan List Scanning by ListTo add a channel to the Scan List Speciﬁcations PowerSpeciﬁcations for Remote User Receiver AP9279 Flash Upgrading Appendices Troubleshooting Try going into command mode again. If APC KVM Switch Installer/User Guide Appendices APC KVM Switch Installer/User Guide If Problems Persist Limited Warranty General policy Examples of life-support devices Life Support PolicyAPC Worldwide Customer Support