APC iSCSI SATA II Attach LUN to VD There are 2 methods to attach LUN to VD

Step 3: Attach LUN to VD.

There are 2 methods to attach LUN to VD.

1.In “/ Volume configuration / Virtual disk”, move the mouse pointer to the gray button next to the VD number; click “Attach LUN”.

2.In “/ Volume configuration / Logical unit”, click

“”.

The procedures are as follows:

1.Select a VD.

2.Input “Host” name, which is a FC node name for access control, or fill-in wildcard “*”, which means every host can access to this volume. Choose

LUN and permission, then click “”.

3.Done.

NOTE: The matching rules of access control are from top to bottom in sequence.

[58]