Linksys SFE2010P manual Connecting to the Switch with Telnet, Logging On to the Console

Page 18

Using the Console

Connecting to the Switch with Telnet

Connecting to the Switch with Telnet

You can connect to the switch with telnet.

1.Open a command line editor and enter telnet <switch ip address>. Then, press the Enter key.

2.When the Login screen appears, select Edit and enter admin in the User Name field. Leave the Password field blank.

3.Press the Esc key to return to the Login screen.

4.Select Enter to enter the CLI interface.

NOTE: The Username & Password Settings screen can also be used to set passwords for other users.

Logging On to the Console

1.Start HyperTerminal and open the connection that you configured previously.

2.When the blinking cursor appears, press the Enter key.

3.When prompted to login, enter the default login and password: admin The Switch Main Menu appears.

Selecting Menu Options and Actions

Within the Console Interface, menus list options in numeric order. Actions appear at the end of the screen. To select menu options and actions, use the following keys on your keyboard:

Key

Function

 

 

Arrow keys

Move the cursor up, down, left, or right.

 

 

Number key

Press the menu number and then press Enter key to select a menu

 

option.

 

 

Tab

Move the cursor from one field to the next on an editing screen.

 

 

Enter

Select an option that is highlighted by the cursor.

 

 

Esc

Return to the previous menu or screen, or move cursor from

 

editable fields to Action list.

 

 

SFE2010/SFE2010P Administration Guide

15

Image 18
Contents Port 10/100 Ethernet Switch Table of Contents Contacts Welcome What’s in this User Guide?Getting to Know the SFE2010/SFE2010P SFE2010/P Front PanelGetting to Know the SFE2010/SFE2010P SFE2010/P Back Panel Sample Network Configuration Maximum Cabling DistancesBefore You Install the Switch Placement OptionsDesktop Placement Rack-Mount Placement Connecting the Cables Wall-Mount PlacementConnecting Devices Connecting to the Switch with the Web-Based Utility Using Menus in the Web-Based UtilityViewing On-line Help Using the Console Connecting to Your Switch with HyperTerminalUsing the Console Set the serial port settings as follows Connecting to the Switch with Telnet Logging On to the ConsoleSelecting Menu Options and Actions Using the Switch Main Menu System ConfigurationSystem Information To open this screenTo open this menu Versions General InformationManagement Settings To change the system contact, system name, and locationSerial Port Configuration Telnet ConfigurationTo change the baud rate of the serial port SSH Configuration To change the time-out settingSSH Server Configuration To change SSH Server settingsTo change SSH Crypto Key Generation settings Username & Password Settings To generate the crypto keySecurity Settings To change User & Password settingsSSL Generate Certificate To edit and execute a certificateDisable Active Management Access Profile To disable the active management access profileShow Certificate Default Vlan Setup Vlan ManagementIP Configuration To edit the Vlan IDIPv4 Address Configuration IPv6 Address Configuration To edit the IPv4 address settingsTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings IPv6 Default Gateway To edit the IPv6 default gateway settingsTo change the Http settings Http ConfigurationHttps Configuration To open the screenNetwork Configuration To change Https settingsTo change the IP address To begin the ping testPing IPv6 To begin the trace route test TraceRoute IPv6 Upgrade / Backup IPv4 File ManagementTo enter the IPv6 Upgrade/Backup file name and location Upgrade / Backup IPv6To enter the IPv4 Upgrade/Backup file name and location To download a file from the specified locationTo enter the active image settings Active ImageReboot System Restore System Default SettingsReset to Factory Settings To restore system default settingsStack Configuration Port StatusPort Status PoE StatusPort Configuration Port SettingsPoE Settings To configure the portsSystem Mode Layer 2 / Layer 3 Selection To configure the PoE settingsTo edit the system mode or stacking mode HelpLogout US/Canada Contacts EU ContactsCustomer Site Survey Yes Limited Warranty Exclusions and LimitationsObtaining Warranty Service Technical Support Obtaining Warranty ServiceIndustry Canada Statement EC Declaration of Conformity EuropeSpecifications Radius Vlan EMC 080312A-LB