Linksys SFE2010P manual Using the Switch Main Menu, System Configuration

Page 19

Using the Console

Using the Switch Main Menu

Using the Switch Main Menu

The Switch Main Menu provides access to screens that you can use to configure your system, view or modify port and PoE settings, and view or modify system and stacking mode.

1.System Configuration (see page 16)

2.Port Status (see page 47)

3.Port Configuration (see page 49)

4.System Mode (Layer 2 / Layer 3) Selection (see page 51)

5.Help (see page 52)

0.Logout (see page 53)

System Configuration

The System Configuration Menu provides access to screens where you can manage system information, view or modify management settings, set up user accounts, and manage security settings. It also provides access to screens where you can manage VLAN IDs, IPv4 and IPv6 settings, and download upgrade files. You also will use this menu if you need to restore default settings, reset the switch to the factory default configuration, or reboot the system.

1.System Information (see page 17)

2.Management Settings (see page 19)

SFE2010/SFE2010P Administration Guide

16

Image 19

Contents Port 10/100 Ethernet Switch Table of Contents Contacts What’s in this User Guide? WelcomeSFE2010/P Front Panel Getting to Know the SFE2010/SFE2010PGetting to Know the SFE2010/SFE2010P SFE2010/P Back Panel Maximum Cabling Distances Sample Network ConfigurationPlacement Options Before You Install the SwitchDesktop Placement Rack-Mount Placement Wall-Mount Placement Connecting the CablesConnecting Devices Using Menus in the Web-Based Utility Connecting to the Switch with the Web-Based UtilityViewing On-line Help Connecting to Your Switch with HyperTerminal Using the ConsoleUsing the Console Set the serial port settings as follows Logging On to the Console Connecting to the Switch with TelnetSelecting Menu Options and Actions System Configuration Using the Switch Main MenuTo open this screen System InformationTo open this menu General Information VersionsTo change the system contact, system name, and location Management SettingsTelnet Configuration Serial Port ConfigurationTo change the baud rate of the serial port To change the time-out setting SSH ConfigurationTo change SSH Server settings SSH Server ConfigurationTo change SSH Crypto Key Generation settings To generate the crypto key Username & Password SettingsTo change User & Password settings Security SettingsTo edit and execute a certificate SSL Generate CertificateTo disable the active management access profile Disable Active Management Access ProfileShow Certificate Vlan Management Default Vlan SetupTo edit the Vlan ID IP ConfigurationIPv4 Address Configuration To edit the IPv4 address settings IPv6 Address ConfigurationTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings To edit the IPv6 default gateway settings IPv6 Default GatewayTo open the screen Http ConfigurationHttps Configuration To change the Http settingsTo change Https settings Network ConfigurationTo begin the ping test To change the IP addressPing IPv6 To begin the trace route test TraceRoute IPv6 File Management Upgrade / Backup IPv4To download a file from the specified location Upgrade / Backup IPv6To enter the IPv4 Upgrade/Backup file name and location To enter the IPv6 Upgrade/Backup file name and locationActive Image To enter the active image settingsTo restore system default settings Restore System Default SettingsReset to Factory Settings Reboot SystemPort Status Stack ConfigurationPoE Status Port StatusPort Settings Port ConfigurationTo configure the ports PoE SettingsTo configure the PoE settings System Mode Layer 2 / Layer 3 SelectionHelp To edit the system mode or stacking modeLogout EU Contacts US/Canada ContactsCustomer Site Survey Yes Exclusions and Limitations Limited WarrantyObtaining Warranty Service Obtaining Warranty Service Technical SupportEC Declaration of Conformity Europe Industry Canada StatementSpecifications Radius Vlan EMC 080312A-LB