Linksys SFE2010P manual Radius

Page 64

Environment	Operating Temp: Operating Temp. 0ºC to 40ºC (32ºF to 104ºF)
	Storage Temp: Storage Temp. -20ºC to 70ºC
	Operating Humidity: Operating Humidity 10% to 90% relative humidity, Non-
	Condensing
	Storage Humidity: Storage Humidity 10% to 95% relative humidity, Non-
	Condensing

Web User Interface	Built-in Web UI for easy browser-based configuration (HTTP/HTTPS)

SNMP	SNMP version 1, 2c, 3 with support for traps

SNMP MIBs	SNMP version 1, 2c, 3 with support for traps
	RFC1213 MIB-2, RFC2863 Interface MIB, RFC2665 Ether-like MIB, RFC1493 Bridge
	MIB, RFC2674 Extended Bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB
	(groups 1,2,3,9 only), RFC2737 Entity MIB, RFC 2618 RADIUS Client MIB RFC 1215
	Traps

RMON	Embedded Remote Monitoring (RMON) software agent supports four RMON
	groups (history, statistics, alarms, and events) for enhanced traffic management,
	monitoring, and analysis.

Firmware Upgrade	Web Browser upgrade (HTTP) and TFTP
	Dual images for resilient firmware upgrades

Port Mirroring	Traffic on a port can be mirrored to another port for analysis with a network
	analyzer or RMON probe

Other Management	Traceroute
	Single IP Management
	Secure Socket Layer (SSL) security for Web UI
	Secure Shell (SSH)
	RADIUS
	Port Mirroring
	TFTP upgrade
	DHCP Client
	BootP
	SNTP
	Xmodem upgrade
	Cable Diagnostics
	PING
	Syslog
	Telnet Client (SSH secure support)

IEEE 802.1x	802.1x - RADIUS Authentication. MD5 Hash
	Guest VLAN
	Single/Multiple Host mode

SFE2010/SFE2010P Administration Guide

61

Image 64

Contents Port 10/100 Ethernet Switch Table of Contents Contacts Welcome What’s in this User Guide?Getting to Know the SFE2010/SFE2010P SFE2010/P Front PanelGetting to Know the SFE2010/SFE2010P SFE2010/P Back Panel Sample Network Configuration Maximum Cabling DistancesPlacement Options Before You Install the SwitchDesktop Placement Rack-Mount Placement Connecting the Cables Wall-Mount PlacementConnecting Devices Connecting to the Switch with the Web-Based Utility Using Menus in the Web-Based UtilityViewing On-line Help Using the Console Connecting to Your Switch with HyperTerminalUsing the Console Set the serial port settings as follows Logging On to the Console Connecting to the Switch with TelnetSelecting Menu Options and Actions Using the Switch Main Menu System ConfigurationTo open this screen System InformationTo open this menu Versions General InformationManagement Settings To change the system contact, system name, and locationTelnet Configuration Serial Port ConfigurationTo change the baud rate of the serial port SSH Configuration To change the time-out settingSSH Server Configuration To change SSH Server settingsTo change SSH Crypto Key Generation settings Username & Password Settings To generate the crypto keySecurity Settings To change User & Password settingsSSL Generate Certificate To edit and execute a certificateTo disable the active management access profile Disable Active Management Access ProfileShow Certificate Default Vlan Setup Vlan ManagementIP Configuration To edit the Vlan IDIPv4 Address Configuration To edit the IPv4 address settings IPv6 Address ConfigurationTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings IPv6 Default Gateway To edit the IPv6 default gateway settingsHttp Configuration Https ConfigurationTo change the Http settings To open the screenNetwork Configuration To change Https settingsTo change the IP address To begin the ping testPing IPv6 To begin the trace route test TraceRoute IPv6 Upgrade / Backup IPv4 File ManagementUpgrade / Backup IPv6 To enter the IPv4 Upgrade/Backup file name and locationTo enter the IPv6 Upgrade/Backup file name and location To download a file from the specified locationTo enter the active image settings Active ImageRestore System Default Settings Reset to Factory SettingsReboot System To restore system default settingsStack Configuration Port StatusPort Status PoE StatusPort Configuration Port SettingsPoE Settings To configure the portsSystem Mode Layer 2 / Layer 3 Selection To configure the PoE settingsTo edit the system mode or stacking mode HelpLogout US/Canada Contacts EU ContactsCustomer Site Survey Yes Limited Warranty Exclusions and LimitationsObtaining Warranty Service Technical Support Obtaining Warranty ServiceIndustry Canada Statement EC Declaration of Conformity EuropeSpecifications Radius Vlan EMC 080312A-LB