Using the Console
System Configuration
To download a file from the specified location:
3.Verify that the file name and location are correct.
4.Select Execute.
5.When the Operation complete message appears, press the Esc key to move the cursor to the Action list.
Active Image
There are two software images on the Ethernet switch: Image 1 and Image 2. When you copy an image to the switch via TFTP, the inactive image is replaced. When you copy an image to the switch via the console port, the active image is replaced.You can use the Active Image screen to specify which image is the active image on the switch.
To open this screen:
1.From the Switch Main Menu, select 1. System Configuration.
2.From the System Configuration Menu, select 7. File Management.
3.From the File Management Menu, select 3. Active Image.
To enter the active image settings
1.Select Edit. The cursor moves to the Active Image after Reset field.
2.Press the Space Bar to change the image setting.
3.When the correct image setting appears in the field, press the Esc key to move the cursor to the Action list.
4.Select Execute to save your settings. The selected image will be active after reset.
5.When the Operation complete message appears, press the Esc key to move the cursor to the Action list.
SFE2010/SFE2010P Administration Guide | 45 |