Linksys SFE2010P manual Port Status, PoE Status

Page 51

Using the Console

Port Status

Port Status

You can use the Port Status screen to view the port connection status. You can use the up or down arrow keys to scroll through all the ports on the switch.

NOTE: To configure ports, use the Port Configuration screen. See ”Port Settings,” on page 49.

To open this screen:

1.From the Switch Main Menu, press 2. Port Status.

2.From the Port Status Menu, press 1. Port Status.

PoE Status

You can use the PoE Status screen to view the PoE status of the ports.

NOTE: To configure PoE, use the PoE Configuration screen. See ”PoE Settings,” on page 50.

To open this screen:

1.From the Switch Main Menu, press 2. Port Status.

2.From the Port Status Menu, press 2. Poe Status.

SFE2010/SFE2010P Administration Guide

48

Image 51
Contents Port 10/100 Ethernet Switch Table of Contents Contacts What’s in this User Guide? WelcomeSFE2010/P Front Panel Getting to Know the SFE2010/SFE2010PGetting to Know the SFE2010/SFE2010P SFE2010/P Back Panel Maximum Cabling Distances Sample Network ConfigurationBefore You Install the Switch Placement OptionsDesktop Placement Rack-Mount Placement Wall-Mount Placement Connecting the CablesConnecting Devices Using Menus in the Web-Based Utility Connecting to the Switch with the Web-Based UtilityViewing On-line Help Connecting to Your Switch with HyperTerminal Using the ConsoleUsing the Console Set the serial port settings as follows Connecting to the Switch with Telnet Logging On to the ConsoleSelecting Menu Options and Actions System Configuration Using the Switch Main MenuSystem Information To open this screenTo open this menu General Information VersionsTo change the system contact, system name, and location Management SettingsSerial Port Configuration Telnet ConfigurationTo change the baud rate of the serial port To change the time-out setting SSH ConfigurationTo change SSH Server settings SSH Server ConfigurationTo change SSH Crypto Key Generation settings To generate the crypto key Username & Password SettingsTo change User & Password settings Security SettingsTo edit and execute a certificate SSL Generate CertificateDisable Active Management Access Profile To disable the active management access profileShow Certificate Vlan Management Default Vlan SetupTo edit the Vlan ID IP ConfigurationIPv4 Address Configuration IPv6 Address Configuration To edit the IPv4 address settingsTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings To edit the IPv6 default gateway settings IPv6 Default GatewayTo open the screen Http ConfigurationHttps Configuration To change the Http settingsTo change Https settings Network ConfigurationTo begin the ping test To change the IP addressPing IPv6 To begin the trace route test TraceRoute IPv6 File Management Upgrade / Backup IPv4To download a file from the specified location Upgrade / Backup IPv6To enter the IPv4 Upgrade/Backup file name and location To enter the IPv6 Upgrade/Backup file name and locationActive Image To enter the active image settingsTo restore system default settings Restore System Default SettingsReset to Factory Settings Reboot SystemPort Status Stack ConfigurationPoE Status Port StatusPort Settings Port ConfigurationTo configure the ports PoE SettingsTo configure the PoE settings System Mode Layer 2 / Layer 3 SelectionHelp To edit the system mode or stacking modeLogout EU Contacts US/Canada ContactsCustomer Site Survey Yes Exclusions and Limitations Limited WarrantyObtaining Warranty Service Obtaining Warranty Service Technical SupportEC Declaration of Conformity Europe Industry Canada StatementSpecifications Radius Vlan EMC 080312A-LB