Table of Contents
1 | Introduction | . . . . . . . . . . . . . 1 |
| What’s in this User Guide? | 1 |
2 | Getting to Know the SGE2010/SGE2010P . | . . . . . . . . . . . . . 2 |
| SGE2010/P Front Panel | 2 |
| SGE2010/P Back Panel | 3 |
3Connecting Devices to the SGE2010/SGE2010P . . . . . . . . . . . 4
Sample Network Configuration | 4 |
Maximum Cabling Distances | 4 |
Before You Install the Switch... | 5 |
Placement Options | 5 |
Desktop Placement | 5 |
6 | |
7 | |
Connecting the Cables | 7 |
4 Using the Console | . . . . . . . . . . . . . . 9 |
Connecting to Your Switch with HyperTerminal | 9 |
Connecting to the Switch with Telnet | 12 |
Logging On to the Console | 12 |
Selecting Menu Options and Actions | 12 |
Using the Switch Main Menu | 13 |
System Configuration | 13 |
System Information | 14 |
Management Settings | 16 |
Username & Password Settings | 21 |
Security Settings | 22 |
VLAN Management | 25 |
IP Configuration | 26 |
File Management | 40 |
Restore System Default Settings | 43 |
Reset to Factory Settings | 43 |
Reboot System | 43 |
Stack Configuration | 44 |
Port Status | 44 |
SGE2010/SGE2010P Administration Guide | i |