Linksys SGE2010P manual Radius

Page 63

Environment	Operating Temp: Operating Temp. 0ºC to 40ºC (32ºF to 104ºF)
	Storage Temp: Storage Temp. -20ºC to 70ºC
	Operating Humidity: Operating Humidity 10% to 90% relative humidity, Non-
	Condensing
	Storage Humidity: Storage Humidity 10% to 95% relative humidity, Non-
	Condensing

Web User Interface	Built-in Web UI for easy browser-based configuration (HTTP/HTTPS)

SNMP	SNMP version 1, 2c, 3 with support for traps

SNMP MIBs	SNMP version 1, 2c, 3 with support for traps
	RFC1213 MIB-2, RFC2863 Interface MIB, RFC2665 Ether-like MIB, RFC1493 Bridge
	MIB, RFC2674 Extended Bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB
	(groups 1,2,3,9 only), RFC2737 Entity MIB, RFC 2618 RADIUS Client MIB RFC 1215
	Traps

RMON	Embedded Remote Monitoring (RMON) software agent supports four RMON
	groups (history, statistics, alarms, and events) for enhanced traffic management,
	monitoring, and analysis.

Firmware Upgrade	Web Browser upgrade (HTTP) and TFTP
	Dual images for resilient firmware upgrades

Port Mirroring	Traffic on a port can be mirrored to another port for analysis with a network
	analyzer or RMON probe

Other Management	Traceroute
	Single IP Management
	Secure Socket Layer (SSL) security for Web UI
	Secure Shell (SSH)
	RADIUS
	Port Mirroring
	TFTP upgrade
	DHCP Client
	BootP
	SNTP
	Xmodem upgrade
	Cable Diagnostics
	PING
	Syslog
	Telnet Client (SSH secure support)

IEEE 802.1x	802.1x - RADIUS Authentication. MD5 Hash
	Guest VLAN
	Single/Multiple Host mode

SGE2010/SGE2010P Administration Guide

60

Image 63

Contents Port 10/100/1000 Ethernet Switch Table of Contents Contacts What’s in this User Guide? IntroductionSGE2010/P Front Panel Getting to Know the SGE2010/SGE2010PSGE2010/P Back Panel Getting to Know the SGE2010/SGE2010PMaximum Cabling Distances Sample Network ConfigurationBefore You Install the Switch Placement OptionsDesktop Placement Rack-Mount Placement Wall-Mount Placement Connecting the CablesConnecting Devices to the SGE2010/SGE2010P Connecting to Your Switch with HyperTerminal Using the ConsoleUsing the Console Set the serial port settings as follows Connecting to the Switch with Telnet Logging On to the ConsoleSelecting Menu Options and Actions System Configuration Using the Switch Main MenuSystem Information To open this screenTo open this menu General Information VersionsTo change the system contact, system name, and location Management SettingsSerial Port Configuration Telnet ConfigurationTo change the baud rate of the serial port To change the time-out setting SSH ConfigurationTo change SSH Server settings SSH Server ConfigurationTo change SSH Crypto Key Generation settings To generate the crypto key Username & Password SettingsTo change User & Password settings Security SettingsTo edit and execute a certificate SSL Generate CertificateDisable Active Management Access Profile To disable the active management access profileShow Certificate Vlan Management Default Vlan SetupTo edit the Vlan ID IP ConfigurationIPv4 Address Configuration IPv6 Address Configuration To edit the IPv4 address settingsTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings To edit the IPv6 default gateway settings IPv6 Default GatewayTo open the screen Http ConfigurationHttps Configuration To change the Http settingsTo change Https settings Network ConfigurationTo begin the ping test To change the IP addressPing IPv6 To begin the trace route test TraceRoute IPv6 File Management Upgrade / Backup IPv4To download a file from the specified location Upgrade / Backup IPv6To enter the IPv4 Upgrade/Backup file name and location To enter the IPv6 Upgrade/Backup file name and locationActive Image To enter the active image settingsTo restore system default settings Restore System Default SettingsReset to Factory Settings Reboot SystemPort Status Stack ConfigurationPoE Status Port StatusPort Settings Port ConfigurationTo configure the ports PoE SettingsTo configure the PoE settings System Mode Layer 2 / Layer 3 SelectionHelp To edit the system mode or stacking modeLogout Using Menus in the Web-Based Utility Connecting to the Switch with the Web-Based UtilityViewing On-line Help EU Contacts US/Canada ContactsCustomer Site Survey Yes Exclusions and Limitations Limited WarrantyObtaining Warranty Service Obtaining Warranty Service Technical SupportEC Declaration of Conformity Europe Industry Canada StatementSpecifications Radius Vlan EMC 080312A-LB