Linksys Complete Guide to Configuring Your Switch with SLM224P Settings
Page 18

Chapter 4

Configuration Using the Web-based Utility

IP Configuration

Management VLAN  This drop-down menu allows you to select the Management VLAN. The default value is 1.

WARNING: The Management VLAN must be set to 1 (default VLAN) if the system IP address (IP Address field) is set to 192.168.1.254. Otherwise, you may not be able to access the system.

IP Address Mode  Specifies whether IP functionality is enabled via manual configuration (Static) or Dynamic Host Configuration Protocol (DHCP). Select Static or DHCP from the drop-down menu. Selecting Static will allow you to enter a static IP address, subnet mask and default gateway using the text field provided. The default setting is DHCP.

IP Address  If you are using a static IP address, enter the IP address here. The Switch’s default IP address is

192.168.1.254.

Subnet Mask  If you are using a static IP address, enter the subnet mask for the currently configured IP address. The default subnet mask is 255.255.255.0.

Default Gateway  If you are using a static IP address, enter the IP address of the default gateway. The default value is 0.0.0.0.

DNS Server  If you are using a static IP address, enter the IP address of the DNS server. A second DNS address can be specified in the additional text field provided.

Click Save Settings to save your changes. Click Cancel Changes to cancel your changes.

Setup > Time

The Time screen allows you to configure the time settings for the Switch.

Setup > Time

Local Time

This is where you set the system date and time for the Switch. All values noted as “two-digit” must consist of two digits; values less than 10 must have a leading zero (for example, 01 instead of 1).

Hours  Enter the two-digit hour here. Minutes  Enter the two-digit minutes here. Seconds  Enter the two-digit seconds here. Month  Enter the two-digit month here. Day  Enter the two-digit day here.

Year  Enter the last two digits of the year here (for example, 07 instead of 2007).

Time Zone  Select your time zone from the drop-down menu. Time zones are identified by the difference between Greenwich Mean Time (GMT) and local time.

Daylight Saving

This is where you configure Daylight Saving Time.

Daylight Saving  Enable daylight saving time by checking the checkbox.

Time Set Offset  Custom daylight saving time is set by entering the time difference in minutes into the Time Set Offset field. The default offset is 60 minutes.

Business Series Smart Gigabit Ethernet Switch

13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Business Series Smart Gigabit Ethernet Switch Icon Descriptions About This GuideAbout This Guide Online ResourcesTable of Contents Table of Contents Appendix B Glossary Appendix C Specifications Appendix D Warranty and Regulatory InformationAppendix E Contact Information Chapter Introduction IntroductionSLM2048 Chapter Product OverviewProduct Overview Back PanelSLM2024 SLM248G SLM248P SLM224G SLM224P Pre-Installation Considerations Chapter InstallationInstallation Placement OptionsHardware Installation Desktop PlacementRack-Mount Placement Uplinking the Switch WithChapter Configuration Using Web-based Utility SetupSetup Summary System Information Setup Network SettingsDevice Information IdentificationLocal Time Setup TimeIP Configuration Daylight SavingPort Management Port Settings Port ConfigurationPort Management Port Management Link Aggregation LAG Configuration Global Parameter Port Management PoE Power SettingsPort Management Lacp Port PriorityVlan Management Create Vlan Vlan Management Port SettingsVlan Management Vlan Management Port to VlanPort The number of the port being configured Vlan Management Vlan to PortJoin Vlan to Port Interface StatisticsStatistics Interface Statistics Ethernet-likeSecurity Security 802.1x SettingsSetting Timer ParametersSecurity Port Security IP Address Enter the IP address to be allowed Security IP Access ListSecurity Storm Control Broadcast Only Counts only Broadcast trafficSecurity Radius CoS Default QoS CoS SettingsCoS Settings QoSQoS Queue Settings QoS Dscp SettingsQoS Basic Mode Spanning Tree STP Status Global SettingSpanning Tree Spanning Tree Global STPSpanning Tree STP Port Settings Bridge SettingsSpeed Displays the speed at which the port is operating Multicast Igmp Snooping Vlan Igmp SettingsMulticast Multicast Bridge MulticastMulticast Bridge Multicast Forward All User Authentication AdminAdmin User Authentication Local User EditQuery Admin Static AddressAdmin Dynamic Address Secure The entry is defined for locked portsAdmin Port Mirroring Admin Save ConfigurationAdmin Factory Default Admin Firmware UpgradeAdmin Reboot Click the Reboot button, then click OK to confirmAdmin Logging Admin Memory LogsAdmin Flash Logs Logout If you select Yes, a confirmation screen appearsAppendix a About Gigabit Ethernet Fiber Optic Cabling Gigabit EthernetFiber Optic Cabling Appendix B Glossary GlossaryGlossary Packet a unit of data sent over a network Mail protocol on the InternetAppendix B Appendix C Specifications SpecificationsSLM2024/SLM2048 Buttons Reset Cabling Type UTP CAT 5 or better for Power Internal Power CertificationConnectors for 10BASE-T UL, cUL, CE mark, CB83 lb 3.1 kg Unit Weight39 lb 2.9 kg 28 lb 3.3 kgAppendix D Warranty and Regulatory Information Limited WarrantyIndustry Canada Statement Safety NoticesFCC Statement Règlement d’Industry CanadaDansk Danish Miljøinformation for kunder i EU Appendix D Norsk Norwegian Miljøinformasjon for kunder i EU Appendix D Appendix E Contact Information
Top Page Image Contents