Linksys SRW208 manual Admin Tab Factory Defaults, Admin Tab Server Logs

WebView Switches

Admin Tab - Factory Defaults

The Factory Reset screen allows network managers to reset the device to the factory defaults shipped with the switch. Restoring factory defaults results in erasing the configuration file.

Admin Tab - Server Logs

The Server Logs screen contains information for viewing and configuring the Remote Log Servers. New log servers can be defined, and the log severity sent to each server.

Server. Specifies the server to which logs can be sent.

UDP Port (1-65535). Defines the UDP port to which the server logs are sent. The possible range is 1 to 65535. The default value is 514.

Facility. Defines a user-defined application from which system logs are sent to the remote server. Only one facility can be assigned to a single server. If a second facility level is assigned, the first facility is overridden. All applications defined for a device utilize the same facility on a server. The field default is Local 7. The possible field values are Local 0 - Local 7.

Description. Provides a user-defined server description.

Minimum Severity. Indicates the minimum severity from which logs are sent to the server. For example, if Notice is selected, all logs from a Notice severity and higher are sent to the remote server.

The Add to List button adds the Server Log configuration to the Server Log Table at the bottom of the screen.

Chapter 5: Using the Web-based Utility for Configuration

Figure 5-72: Admin - Factory Defaults

Figure 5-73: Admin - Server Logs

91

Admin Tab - Factory Defaults