Linksys manual SRW208L Front Panel, Front Panel of the SRW208L

WebView Switches

SRW208L - Front Panel

The Switch's LEDs and ports are located on the front panel.

	Figure 2-3: Front Panel of the SRW208L
LEDs
System	Green. The SYSTEM LED lights up to indicate that the Switch is powered on.
Link/Act	Green. The LINK/ACT LED lights up to indicate a functional network link through the
	corresponding port (1 through 8, G1, or 100LX) with an attached device. It flashes to
	indicate that the Switch is actively sending or receiving data over that port.
100M	Orange. The 100M LED lights up to indicate a 100Mbps connection on the corresponding
	port (1 through 8).
Gigabit	Orange. The Gigabit LED lights up to indicate a Gigabit connection on the corresponding
	RJ-45 port (G1).
Ports
1-8	The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45
	connectors. The Fast Ethernet ports support network speeds of 10Mbps or 100Mbps.
	They can operate in half and full-duplex modes. Auto-sensing technology enables each
	port to automatically detect the speed of the device connected to it (10Mbps or 100Mbps),
	and adjust its speed and duplex accordingly.

Chapter 2: Getting to Know the Switch 7

SRW208L - Front Panel