WebView Switches
Security Tab - ACL Binding
When an ACL is bound to an interface, all the ACE rules that have been defined are applied to the selected interface.Whenever an ACL is assigned on a port or LAG, flows from that ingress interface that do not match the ACL are matched to the default rule, which is Drop unmatched packets.
Interface. Indicates the interface to which the ACL is bound.
ACL Name. Indicates the ACL which is bound to the interface.
The Add to List button adds the ACL Binding configuration to the ACL Binding Table at the bottom of the screen.
Security Tab - RADIUS
Remote Authorization
IP Address. The Authentication Server IP address.
Priority. The server priority. The possible values are
Authentication Port. Identifies the authentication port. The authentication port is used to verify the RADIUS server authentication. The authenticated port default is 1812.
Number of Retries. Defines the number of transmitted requests sent to RADIUS server before a failure occurs. The possible field values are 1 - 10. Three is the default value.
Timeout for Reply. Defines the amount of the time in seconds the device waits for an answer from the RADIUS server before retrying the query, or switching to the next server. The possible field values are 1 - 30. Three is the default value.
Chapter 5: Using the
Figure 5-28: Security - ACL Binding
Figure 5-29: Security - RADIUS
55
Security Tab - ACL Binding