WebView Switches
From. If you selected Other for the Daylight Saving setting, then enter the date and time when daylight savings begins.
To. If you selected Other for the Daylight Saving setting, then enter the date and time when daylight savings ends.
Recurring. If you selected Other for the Daylight Saving setting and daylight savings has the same start and end dates and times every year, then select Recurring.
From. If you selected Recurring, then enter the date and time when daylight savings begins.
To. If you selected Recurring, then enter the date and time when daylight savings ends.
SNTP Servers
Server1. Enter the primary SNTP server here.
Server2. Enter a secondary SNTP server here.
SNTP Polling Interval
Click the Save Settings button to save your changes or click Cancel Changes to discard the information.
Port Management Tab - Port Settings
The Port Management - Port Settings screen shows you the settings for each of the Switch’s ports.
Port. The number of the port. To use an SFP module, click on the Detail button of the appropriate port (G1, G2).
Description. Displays a brief description of the port (can be entered by clicking on the Detail button).
Administrative Status. The port can be taken offline by selecting the Down option. When Up is selected, the port can be accessed normally.
Link Status. Up indicates a port has an active connection, Down indicates there is no active connection or the port has been taken offline by an Administrator.
Speed. The connection speed of the port is displayed here. The speed can be configured only when
Chapter 5: Using the
Figure 5-5: Port Management - Port Settings
34
Port Management Tab - Port Settings