WebView Switches
Add to List. The Add to List button will add the policy to the Policy Name table.
Select Policy. Selects an existing Policy by name. The Policy can be comprised of:
•Class Map
•Action
•Policer
New Policy Name. Defines a new Policy name.
Class Map. Selects an existing Class Map by name.
New Class Map. The New Class Map button opens the New Class Map screen.
New Class Map screen
Class Map Name. Defines a new Class Map name
Preferred ACL. Indicates if packets are first matched to an IP based ACL or a MAC based ACL. The possible field values are:
•IP Based ACLs. Matches packets to IP based ACLs first, then matches packets to MAC based ACLs.
•MAC Based ACLs. Matches packets to MAC based ACLs first, then matches packets to IP based ACLs.
IP ACL. Matches packets to IP based ACLs first, then matches packets to MAC based ACLs.
Match. Criteria used to match IP addresses and /or MAC addresses with an ACL’s address.The possible field values are:
•And. Both the
•Or. Either the
MAC ACL. Matches packets to MAC based ACLs first, then matches packets to IP based ACLs. Police. Enables Policer functionality.
Type. Policer type for the class. Possible values are:
Chapter 5: Using the
Figure 5-42: Advanced Mode - Out of Profile DSCP
Figure 5-43: Advanced Mode - Policy Name
Figure 5-44: Advanced Mode - New Class Map
65
QoS Tab - Advanced Mode