WebView Switches
SNMP Notifications. Indicates if the device can send SNMP notifications.
Authentication Notifications. Indicates if SNMP Authentication failure notification is enabled on the device.
SNMP Tab - Views
SNMP Views provide access or block access to device features or feature aspects. For example, a view can be defined that states that SNMP Group A has Read Only (R/O) access to Multicast groups, while SNMP Group B has
View Name. Displays the
•Default. Displays the default SNMP view for read and read/write views.
•DefaultSuper. Displays the default SNMP view for administrator views.
Subtree ID Tree. Indicates the device feature OID included or excluded in the selected SNMP view. The options to select the Subtree are as follows:
•Select from List. Select the Subtree from the list provided.
•Insert. Enables a Subtree not included in the Select from List field to be entered.
View Type. Indicates if the defined OID branch will be included or excluded in the selected SNMP view.
The Add to List button adds the Views configuration to the Views Table at the bottom of the screen.
SNMP Tab - Group Profile
The Group Profile screen provides information for creating SNMP groups and assigning SNMP access control privileges to SNMP groups. Groups allow network managers to assign access rights to specific device features, or features aspects.
Group Name. Displays the
Security Model. Defines the SNMP version attached to the group. The possible field values are:
•SNMPv1. SNMPv1 is defined for the group.
•SNMPv2. SNMPv2 is defined for the group.
Chapter 5: Using the
Figure 5-57: SNMP - Views
78
SNMP Tab - Views