Chapter 2. Loading Supplies
Reloading a Ribbon Cassette –––––––––––––––––––––––––––––––––
To reload your ribbon cassette, remove the ribbon cassette from the printer and follow these steps:
1.Locate the end of the cassette with the two latches.
n Locate the International Symbols for opening and closing.
(
) indicates the cassette is locked (closed). ( 
) indicates the cassette is unlocked (open).
2.Rotate both latches until they snap into the unlocked position.
3.Lift off the half of the cassette without the latches and set it aside.
Ridged End of | Ribbon | |
| ||
| Spool | |
| Foam | |
| Washer | |
Latch |
|
GearLatch
TC9490OH Rev. C 3/97 | |
|