9490 Operator’s Handbook
To charge the battery:
1.Turn the printer off. () indicates on and (O) indicates off.
2.The battery can be charged on or off the printer. Plug the connector on the charger cord into the socket on the battery as shown.
3.Plug the charger into a grounded electrical outlet of the correct voltage. Allow the battery to charge for a full 8 hours (when using the standard "trickle" charger).
n If you have a problem with short battery life, clean the battery
contacts. See Chapter 4, "Care and Maintenance."
Battery
Charger
Battery
Contacts
Battery
Connector
TC9490OH Rev. C 3/97 |