Paxar manual Addressing a Monarch 9490 Printer

Page 41

9490 Operator’s Handbook

Problem

Solution

 

 

Printer does not

Check battery.

feed.

 

Reload supplies.

 

 

 

 

Verify that the ribbon is not out and that a

 

label is not jammed in the label path.

 

 

Slow or sluggish

Make sure supplies are loaded correctly.

feeding.

 

Check for adhesive build-up in the feed

 

 

path and on the peel blade.

 

 

Label Jam.

Remove jammed supplies.

 

 

 

Clean the printer.

 

 

Battery won’t

Make sure battery is connected correctly.

charge.

 

Make sure charger is plugged into a live

 

 

outlet.

 

 

No LED.

Make sure power is on.

 

 

 

Check battery.

 

 

 

Make sure the power supply is connected

 

to the printer and plugged into a live outlet.

 

 

Printer does not

Check battery.

respond.

 

Check communication settings.

 

 

 

 

Check communications cable.

 

 

 

Print a test label. If you see ADDRESS:

 

your printer has an address assigned.

 

If you are not using the Mobile Printing

 

Station, remove the address. See

 

Addressing a Monarch® 9490Printer

 

addendum (TCMPCLIDAD) for more

 

information or call Technical Support.

 

 

5-4

TC9490OH Rev. C 3/97

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Operator’s Handbook Canadian D.O.C. Warning Page Table of Contents Operator’s Handbook Additional Optional Manuals Chapter Getting StartedAudience Charging the BatteryGetting Started Battery Charger Contacts Connector Loading and Removing the Battery Connecting the AC Power Supply Connecting the Shoulder Strap Using the Trigger and LED Opening the Printer Chapter Loading SuppliesPull the supply guide forward and down as shown Loading Supplies Loading Ribbon Reloading a Ribbon Cassette Operator’s Handbook Loading Supplies Loading for Peel ModeSupply Holder Arrow Width Tabs Make sure the labels turn freely in the supply well Label Guide Upper Opening Lower Loading for Non-Peel Mode Make sure the supplies turn freely in the supply well Supply Guide Upper Opening Lower Operator’s Handbook Establishing Communications Chapter PrintingRemoving the Communications Cable Communication Values Printing in On-Demand ModeInterrupting a Print Job Printing in Continuous ModeCare and Maintenance Clearing Label Jams Voids Correct Print CleaningCleaning the Battery Contacts Reload the battery Operator’s Handbook Printing a Test Label Chapter TroubleshootingLED Indicator Problem Solution Problems and SolutionsAddressing a Monarch 9490 Printer Putting the Boot on the Printer Chapter Using the BootOperator’s Handbook Taking the Boot off the Printer Operator’s Handbook Attaching the Cable Cover Using the Cable CoverRemoving the Cable Cover Specifications Chapter SpecificationsSupply Sizes Accessories and OptionsPin Description Direction Cable Pin OutsOperator’s Handbook Format GlossaryOnline Toll Free
Top Page Image Contents