RuggedCom WIN7000 manual Installation Procedures, Pre-Installation Safety Instructions

3. Installation Procedures

3. Installation Procedures

3.1. Pre-Installation Safety Instructions

Installing the WiN7000 can pose a serious hazard. Be sure to take precautions to avoid the following:

•Exposure to high voltage lines during installation

•Falling when working at heights or with ladders

•Injuries from dropping tools

•Contact with AC wiring (power system connection)

3.2.Package Components and Unpacking

Check that the package contains:

•WiN7000 WiMax Base Station.

•GPS antenna

•2 × RF cables 1.6 m for connection to antenna

•Pole / wall mount kit

•WiNPS 48V power supply for Copper and SFA configuration

3.3.Installation Tools

•Phillips screwdriver

•Wrench or socket set

•Drill and 5/16" drill bit

•Self-fusing electrical tape or insulating putty suitable for use in the unit’s installation environment

•Hammer

RuggedCom® RuggedMAX WiN7000 15 Installation Guide Rev1