3. Installation Procedures
3.6. Power Connections
3.6.1. Copper and SFA Type Base Station
The power system can be supplied by RuggedCom (WiNPS) or by the operator.
Connect the power system DC + ETH output to the WiN cable proprietary connector (supplied by RuggedCom).
Connect the other side of the WiN cable connector to the WiN7000 DC + ETH connector.
The illustration below shows the physical connection between the WiN7000 base station, the power system and the AC power source.
Figure 3.10. Base Station Power Connection
RuggedCom® RuggedMAX WiN7000 | 24 | Installation Guide Rev1 |