RuggedCom WIN7000 manual Appendix B. WiN7000 Specifications

Page 31

Appendix B. WiN7000 Specifications

Appendix B. WiN7000 Specifications

Radio and Modem:

IEEE802.16-2005 (16e OFDMA)

WiMAX Forum Wave 2 Profile

Time Division Duplex (TDD)

Channel Bandwidth (MHz) 3.5, 5, 7, 10

Frequency Resolution 0.25 MHz

Diversity Support 2x2, STC/MIMO-SM

FEC Convolution Code and Turbo Code

Transmit Power Control

Output Power (average) 2 X 36 dBm

Modulation 512/1024 FFT points; QPSK, 16QAM, 64QAM

Radio Interfaces:

Number of Antennae: 2

Antenna Connectors 2 × N-Type, 50 ohm

Integrated or External Sector or Omni Antenna

Built-in GPS

Network Interfaces:

10/100BaseT Half/Full Duplex IEEE 802.3 CSMA/CD

ASN GW Compatibility WiMAX Forum R6, Profile C

Compatible with Cisco and WiChorus ASN-GW

Fiber Optic (Optional)

Configuration and Management:

Web-based user interface

Management SNMP

SNMP Agent SNMP ver 2 client: MIB II

Software Upgrade via FTP

Remote Configuration via FTP

Mechanical:

Dimensions [H × W × D] 756 mm × 290mm × 195 mm

Weight <15kg

Power Interface:

Power supply Input 85-265VAC

Power Consumption 120W max

RuggedCom® RuggedMAX WiN7000

31

Installation Guide Rev1

Image 31
Contents RuggedMAX WiN7000 Registered Trademarks Warranty Contacting RuggedComAll Rights Reserved Disclaimer Of LiabilityTable of Contents List of Figures List of Tables FCC Statement And Cautions About this Guide IntroductionCapabilities and Features Power Supply Requirements Safety InformationGeneral Introduction Lightning Protection Equipment InstallationPower Cord Protection Radio Frequency RF ExposureOutdoor Grounding System User ports and power supplySafety Hazards Antenna Grounding RequirementsWin7000 Dimensions WiN7000 Physical SpecificationsMounting Considerations Site and Installation RequirementsPackage Components and Unpacking Installation ProceduresPre-Installation Safety Instructions Installation ToolsInstalling the WiN7000 Mounting Bracket WiN7000 Mounting BracketPole Mounting Procedure 3.1. Installing the WiN7000 on a PoleWall Mounting WiN7000 Wall Mounting DiagramTower Mount Procedure 3.2. Installing the WiN7000 on a WallCable Connections Copper Ethernet Port Option Weatherproofing Procedure 3.3. Weatherproofing Cable ConnectorsWeatherproofing Cable Connections Wrapping the Connector with Electrical Tape Copper and SFA Type Base Station Power ConnectionsSFD Type Base Station 11. Positive 48V ConfigurationConnecting the WiN7000 to the Web Interface SetupProcedure 4.1. Connecting a computer to the base station RuggedMAX Web Interface General Status No IP connectivity TroubleshootingNo Serial Connection Power and Ethernet Cable Pinouts Appendix A. Connector and Cable PinoutsConsole Cable Pinouts Figure A.2. WiN7000 Console Connector PinoutAppendix B. WiN7000 Specifications Radio SafetyEnvironmental 1613 & IEC61850-3Acronym Description Appendix C. List of AcronymsRuggedCom Inc Appendix D. Warranty