RuggedCom WIN7000 manual Introduction, About this Guide

Page 7

1. Introduction

1. Introduction

The WiN7000 is a member of the RuggedMAX™ family, a line of mobile WiMAX broadband wireless access systems based on the 802.16e mobile WiMAX standard. RuggedMAX systems are designed for robustness and simplicity, offering feature-rich services with low deployment and operation costs.

The WiN7000 base station is a cost-effective solution for wireless access services, designed for point-to-multipoint broadband wireless access applications in varying conditions and locations. The WiN7000 is a one-sector base station, supporting up to 800 subscriber units. Through the addition of routing units, the system can be extended to as many sectors as required and can support additional subscribers and bandwidths.

The base station communicates with fixed and mobile subscriber units, according to defined service criteria and customer service level agreements. The WiN7000 also connects to the service provider backbone, supporting end-to-end Quality of Service (QoS) requirements.

The system uses OFDMA radio technology, providing robustness in adverse channel conditions and enabling Non-Line-Of-Sight (NLOS) operation. This improves coverage and maintains a high level of spectral efficiency. Modulation and coding are continuously adapted to prevailing link conditions, ensuring an optimal balance between robustness and efficiency. The use of STC/ MRC and MIMO radio technologies optimizes link performance, ensuring enhanced bandwidth and service coverage.

The RuggedMAX WiN7000 is a full outdoor base station, designed for easy installation and mounting on poles, street lamps, towers, or walls. The WiN7000 can be equipped with copper or fibre network interfaces for flexible integration into the operator’s backbone.

The WiN7000 is supported by RuggedNMS™, RuggedCom’s comprehensive Network Management System.

1.1. About this Guide

This installation guides describes the installation if the RuggedMAX™ WiN7000 High Power Base Station.

This guide is intended for use by base station installers and operators, and assumes readers have a working knowledge of WiMAX technologies and procedures. While some safety precautions are reviewed here, it is assumed that installers are trained in safe installation practices. Users unfamiliar with safe installation procedures, WiMAX technologies, and service procedures should not rely on this manual for comprehensive guidance.

RuggedCom® RuggedMAX WiN7000

7

Installation Guide Rev1

Image 7
Contents RuggedMAX WiN7000 Registered Trademarks Warranty Contacting RuggedComAll Rights Reserved Disclaimer Of LiabilityTable of Contents List of Figures List of Tables FCC Statement And Cautions About this Guide IntroductionCapabilities and Features Power Supply Requirements Safety InformationGeneral Introduction Lightning Protection Equipment InstallationPower Cord Protection Radio Frequency RF ExposureOutdoor Grounding System User ports and power supplySafety Hazards Antenna Grounding RequirementsWin7000 Dimensions WiN7000 Physical SpecificationsMounting Considerations Site and Installation RequirementsPackage Components and Unpacking Installation ProceduresPre-Installation Safety Instructions Installation ToolsInstalling the WiN7000 Mounting Bracket WiN7000 Mounting BracketPole Mounting Procedure 3.1. Installing the WiN7000 on a PoleWall Mounting WiN7000 Wall Mounting DiagramTower Mount Procedure 3.2. Installing the WiN7000 on a WallCable Connections Copper Ethernet Port Option Weatherproofing Procedure 3.3. Weatherproofing Cable ConnectorsWeatherproofing Cable Connections Wrapping the Connector with Electrical Tape Copper and SFA Type Base Station Power ConnectionsSFD Type Base Station 11. Positive 48V ConfigurationConnecting the WiN7000 to the Web Interface SetupProcedure 4.1. Connecting a computer to the base station RuggedMAX Web Interface General Status No IP connectivity TroubleshootingNo Serial Connection Power and Ethernet Cable Pinouts Appendix A. Connector and Cable PinoutsConsole Cable Pinouts Figure A.2. WiN7000 Console Connector PinoutAppendix B. WiN7000 Specifications Radio SafetyEnvironmental 1613 & IEC61850-3Acronym Description Appendix C. List of AcronymsRuggedCom Inc Appendix D. Warranty