Note: The function of the clip is to hold the nut in place behind the rail. Be sure to install the clip onto the rail so that the nut is centered behind the hole through which you plan to insert the screw.
4.Place the tray in the rack and attach to the clip nuts through the front of the rack using the four (4)
Figure 2-3. Cable Tray Installation in Rack
Cable Tray Table Mounting
To install the concentrator on a table top or on a shelf, place the cable tray on the surface first and then place the concentrator on top of the tray. Note that the four rubber feet must be installed on the concentrator before it is placed on the table top or on top of the cable tray. The feet fit into the four holes in the cable tray, which prevents the concentrator from moving.
2 - 10 ONline