Adaptec 44300, 58300, 48300 About Adaptec Storage Manager, About the Hrconf Command Line Utility

Page 50

Chapter 9: Managing Your Storage Space l 51

About Adaptec Storage Manager

Adaptec Storage Manager is a full-featured software application that helps you build a storage space for your data. With Adaptec Storage Manager, you can group disk drives into logical drives and build in redundancy to protect your data and improve system performance.

Adaptec Storage Manager is included on the Adaptec Storage Manager Installation CD. For installation instructions, refer to the Adaptec Storage Manager User’s Guide, also included on the Adaptec Storage Manager Installation CD.

You can also use Adaptec Storage Manager to monitor and manage all the controllers and disk drives in your storage space from a single location.

When Adaptec Storage Manager is installed on a computer, the Adaptec Storage Manager agent is also installed automatically. The agent is like a service that keeps your storage space running. It runs in the background, without user intervention, and monitors and manages system health, notifies events, schedules tasks, and manages other on-going processes. It sends notices when tasks are completed successfully, and sounds an alarm when errors or failures occur.

The agent uses less memory than the full application. If your storage space includes systems that won’t be connected to monitors (and therefore won’t require the user interface), you can choose to run the agent only on those systems instead of the full application. For more information, refer to the Adaptec Storage Manager User’s Guide or online Help.

Installing Adaptec Storage Manager

Adaptec Storage Manager is included on the Adaptec Storage Manager Installation CD. For installation instructions, refer to the Adaptec Storage Manager User’s Guide for Direct Access Storage , also included on the Adaptec Storage Manager Installation CD.

About the HRCONF Command Line Utility

HRCONF (HostRAID Configuration Utility) is a command line utility that you can use to perform some basic array and configuration management functions.

With HRCONF, you can:

Create and delete logical drives

Modify and copy configuration settings

Recover from disk drive failures and troubleshoot

Note: Adaptec recommends that only advanced users familiar with command line interfaces use

HRCONF.

Image 50
Contents SAS and Sata HostRAID Controller Copyright Adaptec Customer Support Limited 3-Year Hardware Warranty Regulatory Compliance Statements Contents Getting Started Managing Your Storage Space Using the ARC Utility Safety Information About This Guide What You Need to Know Before You BeginTerminology Used in this Guide How to Find More InformationWhat You Need to Know Before You Begin Conventions Used in This GuideAbout This Guide l About Your HostRAID Controller HostRAID Controller Features Array Level FeaturesAbout Your HostRAID Controller l About the Adaptec 58300 Controller PCI-XAbout the Adaptec 48300 Controller About the Adaptec 44300 Controller About the Adaptec 1430SA Controller About the Adaptec 1420SA Controller About the Adaptec 1220SA Controller About the Adaptec 1225SA Controller Kit Contents and System Requirements Kit Contents System RequirementsInstalling the HostRAID Controller Disk Drives Installing the HostRAID Controller Before You BeginSelecting Disk Drives Selecting SAS CablesInstalling the HostRAID Controller and Disk Drives l Connecting Disk Drives to SAS HostRAID Controllers Selecting Sata CablesConnecting Directly to the HostRAID Controller Connecting to a BackplaneChecking Your Controller and Devices Connecting Disk Drives to Sata HostRAID ControllersInstalling the SAS HostRAID Controller to a SAS Expander Setting the Boot Controller Next Steps Getting Started Installing with an Operating System Choosing Installation OptionsBasic Installation Steps Choosing a RAID LevelInstalling on an Existing Operating System Creating a Bootable Array Creating an Array with Adaptec Storage Manager Creating an ArrayCreating an Array with the ACU Making Your Array Bootable Select Express configuration..., then click NextInstalling the Driver and an Operating System Installing with Windows Creating a Driver DiskInstalling with Red Hat Linux Installing with Suse LinuxInstalling with NetWare Installing the Driver on an Existing Operating System Installing on Windows XP or Windows Creating a Driver Disk or an ArrayInstalling on NetWare Installing on Windows VistaInstalling on Red Hat or Suse Linux Continue with Managing Your Storage Space on Managing Your Storage Space About Adaptec Storage Manager About the Hrconf Command Line UtilityInstalling Adaptec Storage Manager Which Utility Should I Use? About the ARC UtilityAbout the Adaptec Flash Utility Solving Problems Failed Disk Drive Protected by a Hot Spare Troubleshooting ChecklistRecovering from a Disk Drive Failure Failed Disk Drive Not Protected by a Hot SpareDisk Drive Failure in a RAID 0 Array Resetting the ControllerFailure in Multiple Arrays Simultaneously Multiple Failures in the Same ArraySolving Problems l Understanding RAID Understanding Drive Segments RAID Technology OverviewRAID 0 Non-RAID Arrays Stripe-Unit SizeRAID 1 Arrays RAID 10 ArraysSelecting the Best RAID Level Introduction to SAS What is SAS? Terminology Used in This AppendixWhat’s a SAS Port? How Do SAS Devices Communicate?What’s a Phy? What do SAS Cables Look Like? What’s a SAS Connector?What’s a SAS Address? How are Disk Drives Identified in SAS?Backplane Connections What are the SAS Connection Options?Direct-Attach Connections SAS Expander ConnectionsHow is SAS Different from Parallel SCSI? SAS DomainParallel Scsi Serial Attached Scsi Using the ARC Utility Creating and Managing Arrays Introduction to the ARC UtilityRunning the ARC Utility Creating a New ArrayQuick Init Creating a RAID 0 on new drives Viewing Array Properties Managing ArraysRebuilding Arrays Enabling/Disabling Write Cache Adding/Deleting Hot SparesDeleting Arrays Configuring Disk Drives Using SerialSelectManaging Bootable Arrays and Devices Atapi SupportSerialSelect Options DeviceUsing SATASelect PHY ConfigurationFormatting and Verifying Disk Drives SATASelect OptionsLocating Disk Drives Identifying Disk DrivesViewing the Event Log Using the Adaptec Flash Utility for DOSObtaining the Firmware IntroductionCompatibility Information Running the Menu-Based AFU Running the AFUCreating the Firmware Kit On Floppy Disks Examples AFU CommandsRunning the AFU from the Command Line Example Command SyntaxCommand Switches Update Updating Flash Using AFU Command Line \ AFU Verify /CTo update a single HostRAID controller HostRAID Controller LED and I2C Connector Reference Adaptec 58300 Activity LED Connector Specification Adaptec 48300 Activity LED Connector SpecificationAdaptec 44300 Activity LED Connector Specification Adaptec 1430SA Activity LED and I2C Connector SpecificationAdaptec 1420SA Activity LED and I2C Connector Specification LedsumAdaptec 1220SA Activity LED Connector Specification Adaptec 1225SA Activity LED SpecificationSafety Information Electrostatic DischargeESDTechnical Specifications Current Requirements Environmental SpecificationsDC Power Requirements Glossary Consistency check command ConfigureConfigured array BuildDrive LED Fault-tolerant arrayDisk ID EventLogical device Native Command QueuingLegacy disk Low-level formatRAID signature RAID volumeSimple volume RebuildStriped array VolumeStripe size TaskIndex ACUSATASelect SerialSelect utilities SATASelect Adaptec, Inc

1430SA, 1225SA, 1420SA, 1220SA, 48300 specifications

Adaptec, a prominent name in the world of storage solutions, offers a diverse array of RAID controller cards aimed at enhancing data storage and management in both consumer and enterprise markets. Among its acclaimed products are the Adaptec 1220SA, 1430SA, 44300, 1225SA, and 1420SA. These cards ensure increased data protection, improved performance, and greater scalability.

The Adaptec 1220SA is a robust SATA RAID controller designed for small to medium-sized businesses. It supports RAID levels 0, 1, 1E, 5, and 10, providing flexibility for users to optimize data redundancy and performance. With the capability of handling up to four SATA drives, it guarantees an efficient and reliable setup while minimizing potential data loss. The controller also features an intuitive web-based management interface, making it easier to administer and configure.

The Adaptec 1430SA extends similar functionality with enhanced features. It is designed to accommodate up to eight SATA drives and supports the latest 3 Gbps SATA technology. This model includes optional battery backup for preserving critical data during unexpected power outages, ensuring that users maintain data integrity and protection at all times.

In the enterprise domain, the Adaptec 44300 shines as a high-performance RAID controller. It offers support for 12 SATA drives, which allows for expansive storage scalability, crucial for data-intensive applications. The advanced RAID features include support for RAID 6, providing dual parity data protection. The controller is built with a powerful processor and memory, allowing for faster data processing and enhanced throughput.

The Adaptec 1225SA is another noteworthy model. Designed for entry-level RAID applications, it offers a balanced combination of performance and reliability. Supporting up to four SATA drives, the 1225SA is particularly well-suited for environments where uptime is critical, delivering functionalities such as hot-swapping. This feature allows users to replace failed drives without shutting down the system, significantly reducing downtime.

Lastly, the Adaptec 1420SA caters to users who require a cost-effective but reliable storage solution. With support for RAID 0, 1, and JBOD, it is a versatile option for enthusiasts and small businesses. The controller can manage up to two SATA drives, making it ideal for basic applications where simplicity and efficiency are paramount.

Collectively, these Adaptec controllers showcase cutting-edge RAID technology and storage management features, reinforcing their position as reliable options for users ranging from home users to enterprise-level organizations seeking optimal data storage solutions.