Rose electronic MAN-VR2 manual Remote Configuration

Remote Configuration

Connect remotely to the Vista Remote 2 unit from any network workstation. When connected, click on the “Configure” tab in the upper right corner of the display. The below configuration menu will display. Some of the remote configuration menus are similar to the local configuration menus.

Clicking on the Configure tab

Displays the configuration window

Figure 11. Remote Configuration Menu (Following describes each of the Configuration Tabs.

	Allows you to create and manage up to sixteen separate user
User Accounts	accounts, each with separate access permissions. Account #1 is
	the admin account. Enter User name, password. Tick/un-tick the
	Local and Remote options that are appropriate to the user.
	Allows you to modify unit settings within the Vista Remote 2. You
Unit Configuration	can define the keyboard, set-up the admin account, assign a name
	to the unit, screensaver time and encryption options
Time & Date	Set the time and date, this time stamps the log files
	Configures the network IP, network mask, gateway, VNC port, HTTP
Network Configuration	port. You can alter any of the existing network settings plus you can
	set-up the IP access control feature that lets you specifically include
	or exclude certain addresses or networks
	Allows configuration of various details for each host system
Host Configuration	connected to Vista Remote 2. 128 entries max, Add host names,
	Users and Hotkey.
Logging and Status	Provides various details about the Vista Remote 2 activity
LDAP Configuration	Configures unit for LDAP
Return to Host	Exit the configuration menu system and return to the host computer

14

Vista Remote 2 Installation and Operations Manual