Rose electronic MAN-VR2 manual KVM Switch Module Configuration, KVM Switch Module OSD

KVM Switch Module Configuration

Connect to the unit directly from the local KVM station and logon. A computer must be connected to CPU port #1 and powered on. Using the local keyboard, press and release the left Ctrl key, then within 2 seconds press the F12 key. The press and release of the left Ctrl key notifies the KVM Switch module that the next command issued within 2 seconds is a command for the KVM Switch, not a connected computer. The F12 key will invoke the KVM switch modules OSD main menu shown below.

The on-screen display (OSD) option is available for the all Vista Remote 2 models. You can use the OSD to configure the switch module, select a computer from a list, display what computer you are switched to and set up additional security options for the switches’ configuration and for computer access.

When entering information into the menu system, use only the numeric keys above the keyboard, the numeric keys and <Enter> key on the keypad will not work.

Figure 17. KVM Switch Module OSD

Use the up / down arrow keys to select the item needed and press enter. That selection menu will display for inputs

24

Vista Remote 2 Installation and Operations Manual