OPERATION
Remote System Operation
Connecting using a web browser
Connecting to the Vista Remote 2 from a network location or over the internet can be done two ways; using the
To connect to the Vista Remote 2 from any workstation, start a web browser and enter the assigned IP address for the unit in the URL field of the browser (Example http://192.168.0.44). The Vista Remote 2 will respond with the below three options displayed in the browser’s window.
The first time a connection to the Vista Remote 2 is made, it is recommended that you download the Windows VNC viewer from the unit, save it and run the VNC viewer to connect to the unit directly. Some operating systems may request permission to run or save the program. Save the program to the location wanted and create a desktop ICON for the program. The next time the RealVNC viewer is needed, just click on the desktop ICON to connect.
After the installation is complete, run the VNC viewer program and the VNC Viewer Connection Details window will display. Make sure that the Server IP address is correct and the port number is 5900. If the port number was changed during the unit configuration procedure, this number will match that VNC port configuration number.
Click on “OK” to enter your Username and Password
Click on the OK tab and VNC Authentication box will display. Enter the Username and password and click OK. Upon validation, the remote connected computer’s video will display. NOTE: If the username or password is entered incorrectly five consecutive times, the remote user station’s IP address is locked out and remote access is denied. The lockout of an IP address will show up in the log as IP address “Blacklisted”. (See the troubleshooting section for the procedure to unlock the IP address)
Click on the OK tab and the remote connected computer’s video will display.
Vista Remote 2 Installation and Operations Manual | 33 | |
|
|
|