Powerware 8 - 10 kVA, 8 - 15 kVA manual Software and connectivity, Communication cables

Page 26

6. Software and connectivity

The software Suite CD-ROM that is bundled with the UPS contains software distributions and documentation in CD format. Furthermore, the comprehensive connectivity option portfolio includes Web/SNMP adapters for networked environments, Modem card for 24/7 remote monitoring, ModBus/Jbus card for building management system integration, relay interface cards for industrial and facilities use and RS-232 cards for serial communication to one or multiple computers.

Communication cables

It is recommended that the control cables and power cables be installed on separate trays. Where control cables will cross power cables make sure they are arranged at an angle as near to 90 degrees as possible.

All control cables shall preferably be shielded. If the shield is grounded, this shall take place on only one end of the cable.

The procedure for connecting the control cables is the following:

1.Remove the front cover by lifting the cover from the bottom outwards by releasing the retaining clip. It’s located in the bottom part of the bezel.

2.Locate the control terminal or X-slot module where you want to install the communications cable.

Figure 30. Location of control cable terminals.

Connection to the standard RS-232 port (X53)

The standard RS-232 interface uses 9-pin female D-sub connector. It shall be used with the delivered cable for a computer or external modem connection. The data is transmitted with XCP protocol that includes status and meters information about the UPS. The RS-232 port has the following format:

Data bits

8

Parity

None

Stop bits

1

Handshake

None

26

UPS 8 – 15 kVA, 230V 50/60 Hz output

1022403

 

User’s Guide

Revision B1

Image 26
Contents Page Copyright Contents Audience Safety instructionsUser precautions CE markingEnvironment InquiriesUnpacking and visual inspection Mechanical installationDelivery check Type designation label Planning before installation Equipment Weight Point DistributedCabinet installation Mechanical bypass switchMechanical bypass switch MBS when installed in the backside Transformer option External battery cabinet option Battery racksElectrical installation Location of the power terminalsPower cables and protective fuses Power terminals found in UPS unitsWiring procedure Installation procedureWiring diagram of UPS N-model 3-ph rectifier Wiring diagram of UPS NT-model 3-ph rectifier Wiring diagram of UPS S-model 1-ph rectifier Wiring diagram of UPS ST-model 1-ph rectifier Wiring diagram of UPS S-model 1-ph rectifier, Norway External Battery Cabinet EBC installation procedure Do not place EBC on the UPS unitUser Settings Number of Battery Strings SPM tie cabinet Dimensions of the SPM SPM9155 wiring diagram with three UPSs connected Connection to the standard RS-232 port Software and connectivityCommunication cables External control connections LanSafe softwareEmergency Power Off EPO External control cable connections to the UPSProgrammable signal inputs Relay outputsSlot communication option SNMP/Web Module optionalModus/Jbus Module optional AS400 Relay Module optionalSingle Serial Port Module optional User operations Display functionsUser Settings Description Available settings Default setting GeneralChanging language Configuring user settingsUsing relay outputs Changing charging currentShutdown Battery start-upNormal start-up CheckScrapping MaintenanceRegular service/intervals BatteriesCooling fan LED IndicatorsMaintenance bypass switch MBS operation Turn UPS from normal mode to mechanical bypass No break transfer from normal mode to Service BypassTurn UPS from mechanical bypass to normal mode No break transfer from Mechanical Bypass to normal modeTurn on S3 switch to connect UPS output to load Dimensional drawings UPS models with no battery sectionsExternal battery cabinet models with 2 and 3 sections Characteristics Technical dataMechanical configuration StandardsAC output AC inputDC circuit Warranty

8 - 15 kVA, 8 - 10 kVA specifications

Powerware 8 - 10 kVA and 8 - 15 kVA are robust uninterruptible power supply (UPS) systems designed to provide reliable power protection and enhanced performance for critical applications. These UPS systems are ideal for various business environments, including data centers, server rooms, and industrial settings.

A primary feature of the Powerware series is its modular design, which allows for easy scalability and adaptability to meet the growing power requirements of modern IT infrastructure. The systems can be configured to provide redundancy, ensuring increased reliability and uptime while delivering high-efficiency performance.

One of the standout characteristics of the Powerware 8 - 10 kVA and 8 - 15 kVA models is their advanced double-conversion technology, which offers consistent power conditioning and isolation from utility issues like voltage surges, frequency variations, and power outages. This technology ensures that connected devices receive clean, stable power, minimizing the risk of downtime caused by electrical disturbances.

Another key feature is the availability of an intuitive LCD display that provides users with real-time information about the UPS status, critical alarms, and event logs, enabling proactive management of power demands and potential issues. The systems also support remote monitoring and management through advanced communication options, allowing IT administrators to maintain oversight of the power environment from any location.

The Powerware series incorporates high-efficiency designs that help reduce energy consumption, ultimately lowering operational costs. With an input power factor of up to 0.99 and a typical efficiency exceeding 94%, these UPS units not only contribute to environmental sustainability but also enhance the overall performance of the power infrastructure.

In addition to these practical features, the Powerware 8 - 10 kVA and 8 - 15 kVA models are equipped with multiple output options, including configurable outlets and hardwire connections, offering flexibility in deployment. They also come with advanced battery management systems, which optimize battery performance, extending their lifespan and reducing maintenance efforts.

Overall, Powerware 8 - 10 kVA and 8 - 15 kVA systems are reliable choices for businesses seeking efficient and adaptable power protection solutions to support their critical operations. Their innovative technologies and comprehensive features ensure that companies can maintain productivity while safeguarding their valuable equipment and data against power disruptions.