SUPER MICRO Computer X9DRG-HTF WPCM450R DDR2 Memory Interface, WPCM450R PCI System Interface

Page 23

Chapter 1: Overview

control Super IO functions. The WPCM450R Controller is connected to the network via an external Ethernet PHY module or shared NCSI connections.

The WPCM450R communicates with onboard components via six SMBus inter- faces, PECI (Platform Environment Control Interface) buses, and General Purpose I/O ports.

WPCM450R DDR2 Memory Interface

The WPCM450R supports a 16-bit DDR2 memory module with a speed of up to 220 MHz. For best signal integrity, the WPCM450R provides point-to-point connection.

WPCM450R PCI System Interface

The WPCM450R provides 32-bit, 33 MHz 3.3V PCI interface, which is compliant with the PCI Local Bus Specification Rev. 2.3. The PCI system interface connects to the onboard PCI Bridge used by the graphics controller.

Other Features Supported by the WPCM BMC Controller

The WPCM450R supports the following features:

IPMI 2.0

Serial over LAN

KVM over LAN

LAN Alerting-SNMP Trap

Event Log

X-Bus parallel interface for I/O expansion

Multiple ADC inputs, Analog and Digital Video outputs

SPI Flash Host BIOS and firmware bootstrap program supported

Reduced Media Independent Interface (RMII)

OS (Operating System) Independency

Provides remote Hardware Health Monitoring via IPMI. Key features

1-15

Image 23
Contents X9DRG-HF X9DRG-HTF Page About This Motherboard Manual Organization PrefaceConventions Used in the Manual Asia-Pacific Contacting SupermicroEurope Table of Contents Vii Appendix a Bios Error Beep Codes Overview ChecklistMotherboard Image Motherboard Layout PCH X9DRG-HF/X9DRG-HTF Quick ReferenceConnectors Description X9DRG-HF/X9DRG-HTF Jumpers Description Default SettingX9DRG-HF/X9DRG-HTF Connectors Description State Status X9DRG-HF/X9DRG-HTF LED IndicatorsCPU Motherboard FeaturesSuper I/O Sata ConnectionsIpmi Serial COM PortFan Control DimensionsPCI-E X8 G3 System Block DiagramProcessor and Chipset Overview PC Health Monitoring Special FeaturesRecovery from AC Power Loss Environmental Temperature ControlSuper I/O Acpi FeaturesPower Supply Slow Blinking LED for Suspend-State IndicatorManagement Engine ME Advanced Power ManagementIntel Intelligent Power Node Manager NM Overview of the Nuvoton WPCM450 ControllerWPCM450R PCI System Interface Other Features Supported by the Wpcm BMC ControllerWPCM450R DDR2 Memory Interface Page Standardized Warning Statements Battery HandlingPage 製品の廃棄 Product DisposalPage Installing the LGA2011 Processor Processor and Heatsink InstallationSocket Socket Keys CPU Keys Lever Lock Gently close the load plateMounting Holes Installing a Passive CPU HeatsinkScrew#1 Screw#2 Motherboard Removing the Heatsink Removing Memory Modules Installing and Removing the Memory ModulesInstalling & Removing DIMMs Processor and Memory Module Population Processors and their Corresponding Memory ModulesPopulating Udimm ECC/Non-ECC Memory Modules Intel E5-2600 Series Processor Udimm Memory Support Populating Lrdimm ECC Memory Modules Location of Mounting Holes Motherboard InstallationTools Needed Installing the Motherboard Back Panel I/O Port Locations and Definitions Control Panel Connectors and I/O PortsBack Panel Connectors and I/O Ports Video Connection Universal Serial Bus USBLAN Ports Pin Definition Ethernet PortsUID LED LE4 Unit Identifier SwitchFront Control Panel JF1 Header PinsNMI Button Power LEDFront Control Panel Pin Definitions NIC1/NIC2 LED Indicators HDD LED/UID SwitchOverheat OH/Fan Fail/PWR Fail/UID Power Fail LEDPower Button Reset ButtonPower Connectors Connecting CablesChassis Intrusion Fan HeadersOverheat LED/Fan Fail TPM Header/PortSGPIO1/2/-S Headers Power SMB I2C ConnectorsExplanation of Jumpers Jumper SettingsGlan Enable/Disable Cmos Clear Watch Dog Enable/DisableBMC Enable VGA EnableManufacture Mode Select Management Engine ME RecoveryIpmi Dedicated LAN LEDs Onboard LED IndicatorsGlan LEDs BMC Heartbeat LED Onboard Power LEDRear UID LED Serial ATA Ports Serial ATA ConnectionsNo Power Troubleshooting ProceduresBefore Power On No Video System Boot FailureLosing the System’s Setup Configuration When the System Becomes Unstable Memory ErrorsSystem becomes unstable before or during OS installation Technical Support Procedures Proper Battery Disposal Battery Installation Battery Removal and InstallationBattery Removal Frequently Asked Questions Returning Merchandise for Service Introduction Starting Bios Setup UtilityStarting the Setup Utility Main SetupHow To Change the Configuration Data Memory Information Total Memory System Date/System TimeSupermicro X9DRG-HF Version Build DateBoot Features Advanced Setup ConfigurationsSocket 1 CPU Information/Socket 2 CPU Information Power ConfigurationCPU Configuration Rtid Record Types IDs CPU Speed64-bit Clock Spread SpectrumActive Processor Cores MLC Streamer Prefetcher Available when supported by the CPUMLC Spatial Prefetch Available when supported by the CPU DCU Streamer Prefetcher Available when supported by the CPUTurbo Mode Available when Power Technology is set to Custom  CPU Power Management ConfigurationPower Technology Eist Available when Power Technology is set to CustomEnergy/Performance Bias Factory Long Duration Power LimitLong Duration Power Limit Recommended Short Duration PowerIntegrated IO Configuration Chipset Configuration North BridgeQPI Configuration Current Memory Speed Current Memory ModeMemory Mode Dram Rapl ModeDemand Scrub Channel InterleavingRank Interleaving Patrol ScrubSATA Configuration South Bridge ConfigurationAggressive Link Power Management Sata ModeIDE Mode Ahci ModePCIe/PCI/PnP Configuration SCU Storage Control Unit ConfigurationLoad Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM Maximum Read RequestAspm Support Onboard LAN Option ROM SelectSOL Configuration Super IO ConfigurationSerial Port 1 Configuration Serial Port Console Redirection Console Redirection SettingsStop Bits Recorder ModeResolution Legacy OS Redirection ResolutionData Bits, Parity, Stop Bits ACPI SettingsOut-of-Band Management Port TPM Enable Status ME Subsystem Intel TXT LT-SX ConfigurationWake on LAN NIC ConfigurationISCSI Initiator Name Link SpeedEvent Logs Change Smbios Event Log SettingsEnabling/Disabling Options Smbios Event Log Erasing Settings Erase Event Log Runtime Error Logging SupportMemory Correctable Error Threshold PCI Error Logging SupportSystem Event Log IpmiBMC Network Configuration Gateway IP Address BootSubnet Mask Station MAC AddressUser Password Delete Boot OptionDelete Boot Option Administrator PasswordSave Options Save Changes Save Changes and ResetSave & Exit Discard Changes and ExitBoot Override Restore Optimized DefaultsSave as User Defaults Restore User DefaultsX9 Ipmi Error Codes Bios Error Beep CodesBios Error Beep Codes X9DRG-HF/X9DRG-HTF Motherboard User’s Manual Driver/Tool Installation Display Screen Installing Software ProgramsConfiguring SuperDoctor SuperDoctor III Interface Display Screen-II Remote Control X9DRG-HF/X9DRG-HTF Motherboard User’s Manual