SUPER MICRO Computer X9DRG-HF, X9DRG-HTF South Bridge Configuration, SATA Configuration

Page 84

X9DRG-HF/X9DRG-HTF Motherboard User’s Manual

South Bridge Configuration

This feature allows the user to configure the settings for the Intel PCH chip.

PCH Information

This feature displays the following PCH information.

Name: This item displays the name of the PCH chip.

Stepping: This item displays the status of the PCH stepping.

USB Devices: This item displays the USB devices detected by the BIOS.

All USB Devices

This feature enables all USB ports/devices. The options are Disabled and Enabled. (If set to Enabled, EHCI Controller 1 and Controller 2 will appear.)

EHCI Controller 1/EHCI Controller 2 (Available when All USB Devices is set to Enabled)

Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 1 or Controller 2. The options are Disabled and Enabled.

Legacy USB Support (Available when USB Functions is not Disabled)

Select Enabled to support legacy USB devices. Select Auto to disable legacy sup- port if USB devices are not present. Select Disable to have USB devices available for EFI (Extensive Firmware Interface) applications only. The settings are Disabled, Enabled and Auto.

Port 60/64 Emulation

Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB keyboard so that it can be fully supported by the operating systems that does not recognize a USB device. The options are Disabled and Enabled.

EHCI Hand-Off

This item is for operating systems that do not support Enhanced Host Controller Interface (EHCI) hand-off. When enabled, EHCI ownership change will be claimed by the EHCI driver. The options are Disabled and Enabled.

SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of IDE or SATA devices and displays the following items.

SATA Port0~SATA Port5: The AMI BIOS displays the status of each SATA port as detected by the BIOS.

4-14

Image 84

Contents X9DRG-HF X9DRG-HTF Page Preface About This Motherboard Manual OrganizationConventions Used in the Manual Contacting Supermicro EuropeAsia-Pacific Table of Contents Vii Appendix a Bios Error Beep Codes Checklist OverviewMotherboard Image Motherboard Layout X9DRG-HF/X9DRG-HTF Quick Reference PCHX9DRG-HF/X9DRG-HTF Jumpers Description Default Setting X9DRG-HF/X9DRG-HTF ConnectorsConnectors Description X9DRG-HF/X9DRG-HTF LED Indicators Description State StatusMotherboard Features CPUSata Connections IpmiSerial COM Port Super I/ODimensions Fan ControlSystem Block Diagram PCI-E X8 G3Processor and Chipset Overview Special Features Recovery from AC Power LossEnvironmental Temperature Control PC Health MonitoringAcpi Features Power SupplySlow Blinking LED for Suspend-State Indicator Super I/OAdvanced Power Management Intel Intelligent Power Node Manager NMOverview of the Nuvoton WPCM450 Controller Management Engine MEOther Features Supported by the Wpcm BMC Controller WPCM450R DDR2 Memory InterfaceWPCM450R PCI System Interface Page Battery Handling Standardized Warning StatementsPage Product Disposal 製品の廃棄Page Processor and Heatsink Installation Installing the LGA2011 ProcessorSocket Socket Keys CPU Keys Gently close the load plate Lever LockInstalling a Passive CPU Heatsink Screw#1 Screw#2 MotherboardMounting Holes Removing the Heatsink Installing and Removing the Memory Modules Installing & Removing DIMMsRemoving Memory Modules Processors and their Corresponding Memory Modules Processor and Memory Module PopulationPopulating Udimm ECC/Non-ECC Memory Modules Intel E5-2600 Series Processor Udimm Memory Support Populating Lrdimm ECC Memory Modules Motherboard Installation Tools NeededLocation of Mounting Holes Installing the Motherboard Control Panel Connectors and I/O Ports Back Panel Connectors and I/O PortsBack Panel I/O Port Locations and Definitions Universal Serial Bus USB Video ConnectionEthernet Ports LAN Ports Pin DefinitionUnit Identifier Switch UID LED LE4JF1 Header Pins Front Control PanelPower LED Front Control Panel Pin DefinitionsNMI Button HDD LED/UID Switch NIC1/NIC2 LED IndicatorsPower Fail LED Overheat OH/Fan Fail/PWR Fail/UIDReset Button Power ButtonConnecting Cables Power ConnectorsFan Headers Chassis IntrusionTPM Header/Port Overheat LED/Fan FailPower SMB I2C Connectors SGPIO1/2/-S HeadersJumper Settings Glan Enable/DisableExplanation of Jumpers Watch Dog Enable/Disable Cmos ClearVGA Enable BMC EnableManagement Engine ME Recovery Manufacture Mode SelectOnboard LED Indicators Glan LEDsIpmi Dedicated LAN LEDs Onboard Power LED BMC Heartbeat LEDRear UID LED Serial ATA Connections Serial ATA PortsTroubleshooting Procedures Before Power OnNo Power System Boot Failure Losing the System’s Setup ConfigurationNo Video Memory Errors When the System Becomes UnstableSystem becomes unstable before or during OS installation Technical Support Procedures Battery Removal and Installation Battery RemovalProper Battery Disposal Battery Installation Frequently Asked Questions Returning Merchandise for Service Starting Bios Setup Utility IntroductionMain Setup How To Change the Configuration DataStarting the Setup Utility System Date/System Time Supermicro X9DRG-HF VersionBuild Date Memory Information Total MemoryAdvanced Setup Configurations Boot FeaturesPower Configuration CPU ConfigurationSocket 1 CPU Information/Socket 2 CPU Information CPU Speed 64-bitClock Spread Spectrum Rtid Record Types IDsMLC Streamer Prefetcher Available when supported by the CPU MLC Spatial Prefetch Available when supported by the CPUDCU Streamer Prefetcher Available when supported by the CPU Active Processor Cores CPU Power Management Configuration Power TechnologyEist Available when Power Technology is set to Custom Turbo Mode Available when Power Technology is set to CustomFactory Long Duration Power Limit Long Duration Power LimitRecommended Short Duration Power Energy/Performance BiasChipset Configuration North Bridge Integrated IO Configuration QPI Configuration Current Memory Mode Memory ModeDram Rapl Mode Current Memory SpeedChannel Interleaving Rank InterleavingPatrol Scrub Demand ScrubSouth Bridge Configuration SATA ConfigurationSata Mode IDE ModeAhci Mode Aggressive Link Power ManagementSCU Storage Control Unit Configuration PCIe/PCI/PnP ConfigurationMaximum Read Request Aspm SupportOnboard LAN Option ROM Select Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROMSuper IO Configuration Serial Port 1 ConfigurationSOL Configuration Console Redirection Settings Serial Port Console RedirectionRecorder Mode ResolutionLegacy OS Redirection Resolution Stop BitsACPI Settings Out-of-Band Management PortData Bits, Parity, Stop Bits TPM Enable Status Intel TXT LT-SX Configuration ME SubsystemNIC Configuration ISCSI Initiator NameLink Speed Wake on LANChange Smbios Event Log Settings Enabling/Disabling Options Smbios Event LogEvent Logs Runtime Error Logging Support Memory Correctable Error ThresholdPCI Error Logging Support Erasing Settings Erase Event LogIpmi System Event LogBMC Network Configuration Boot Subnet MaskStation MAC Address Gateway IP AddressDelete Boot Option Delete Boot OptionAdministrator Password User PasswordSave Changes and Reset Save & ExitDiscard Changes and Exit Save Options Save ChangesRestore Optimized Defaults Save as User DefaultsRestore User Defaults Boot OverrideBios Error Beep Codes Bios Error Beep CodesX9 Ipmi Error Codes X9DRG-HF/X9DRG-HTF Motherboard User’s Manual Installing Software Programs Driver/Tool Installation Display ScreenConfiguring SuperDoctor SuperDoctor III Interface Display Screen-II Remote Control X9DRG-HF/X9DRG-HTF Motherboard User’s Manual