Chapter 4 Web Management Interface
4.4.2 Configuration Save / Restore
This function is used to backup and to restore the NP725 settings. The NP725 can also be restored to the factory default settings using this function. It can be used to duplicate settings to other access points (backup settings and then restore in another AP).
Reset to Default: Click Reset to load the factory default settings of the NP725. After confirming this action, the system will reset all parameters. Reboot to let the default settings take effect.
Backup Settings: Click Save button to save the current system configurations to a backup file on a local disk of the management console. A backup file for NP725 keeps the current system settings. Before any configuration changed, it is recommended to backup the system before you proceed with any changes; thus, it can be recovered soon if occasionally something wrong happened.
Restore Settings: Click on the Browse button to select configuration file to restore, and then, press
Upload to proceed. After confirming the action, the system will start to replace the existing settings with this newly uploaded one; reboot the system as required to ensure the parameter changes take effect.
Since network parameters have been reset/restored, the administrator may need to change PC’s network settings in order to match NP725’s default settings.
40
