SUPER MICRO Computer X9DRG-HF, X9DRG-HTF user manual Advanced Setup Configurations, Boot Features

Page 74

X9DRG-HF/X9DRG-HTF Motherboard User’s Manual

4-3 Advanced Setup Configurations

Select the Advanced tab to access the following submenu items.

Boot Features

Quiet Boot

This feature allows the user to select bootup screen display between POST mes- sages and the OEM logo. Select Disabled to display the POST messages. Select Enabled to display the OEM logo instead of the normal POST messages. The op- tions are Enabled and Disabled.

AddOn ROM Display Mode

Use this item to set the display mode for the Option ROM. Select Keep Current to use the current AddOn ROM Display setting. Select Force BIOS to use the Option ROM display mode set by the system BIOS. The options are Force BIOS and Keep Current.

Bootup Num-Lock

Use this feature to set the Power-on state for the Numlock key. The options are Off and On.

Wait For 'F1' If Error

Select Enabled to force the system to wait until the 'F1' key is pressed if an error occurs. The options are Disabled and Enabled.

4-4

Image 74

Contents X9DRG-HF X9DRG-HTF Page Preface About This Motherboard Manual OrganizationConventions Used in the Manual Asia-Pacific Contacting SupermicroEurope Table of Contents Vii Appendix a Bios Error Beep Codes Checklist OverviewMotherboard Image Motherboard Layout X9DRG-HF/X9DRG-HTF Quick Reference PCHConnectors Description X9DRG-HF/X9DRG-HTF Jumpers Description Default SettingX9DRG-HF/X9DRG-HTF Connectors X9DRG-HF/X9DRG-HTF LED Indicators Description State StatusMotherboard Features CPUSerial COM Port Sata ConnectionsIpmi Super I/ODimensions Fan ControlSystem Block Diagram PCI-E X8 G3Processor and Chipset Overview Environmental Temperature Control Special FeaturesRecovery from AC Power Loss PC Health MonitoringSlow Blinking LED for Suspend-State Indicator Acpi FeaturesPower Supply Super I/OOverview of the Nuvoton WPCM450 Controller Advanced Power ManagementIntel Intelligent Power Node Manager NM Management Engine MEWPCM450R PCI System Interface Other Features Supported by the Wpcm BMC ControllerWPCM450R DDR2 Memory Interface Page Battery Handling Standardized Warning StatementsPage Product Disposal 製品の廃棄Page Processor and Heatsink Installation Installing the LGA2011 ProcessorSocket Socket Keys CPU Keys Gently close the load plate Lever LockMounting Holes Installing a Passive CPU HeatsinkScrew#1 Screw#2 Motherboard Removing the Heatsink Removing Memory Modules Installing and Removing the Memory ModulesInstalling & Removing DIMMs Processors and their Corresponding Memory Modules Processor and Memory Module PopulationPopulating Udimm ECC/Non-ECC Memory Modules Intel E5-2600 Series Processor Udimm Memory Support Populating Lrdimm ECC Memory Modules Location of Mounting Holes Motherboard InstallationTools Needed Installing the Motherboard Back Panel I/O Port Locations and Definitions Control Panel Connectors and I/O PortsBack Panel Connectors and I/O Ports Universal Serial Bus USB Video ConnectionEthernet Ports LAN Ports Pin DefinitionUnit Identifier Switch UID LED LE4JF1 Header Pins Front Control PanelNMI Button Power LEDFront Control Panel Pin Definitions HDD LED/UID Switch NIC1/NIC2 LED IndicatorsPower Fail LED Overheat OH/Fan Fail/PWR Fail/UIDReset Button Power ButtonConnecting Cables Power ConnectorsFan Headers Chassis IntrusionTPM Header/Port Overheat LED/Fan FailPower SMB I2C Connectors SGPIO1/2/-S HeadersExplanation of Jumpers Jumper SettingsGlan Enable/Disable Watch Dog Enable/Disable Cmos ClearVGA Enable BMC EnableManagement Engine ME Recovery Manufacture Mode SelectIpmi Dedicated LAN LEDs Onboard LED IndicatorsGlan LEDs Onboard Power LED BMC Heartbeat LEDRear UID LED Serial ATA Connections Serial ATA PortsNo Power Troubleshooting ProceduresBefore Power On No Video System Boot FailureLosing the System’s Setup Configuration Memory Errors When the System Becomes UnstableSystem becomes unstable before or during OS installation Technical Support Procedures Proper Battery Disposal Battery Installation Battery Removal and InstallationBattery Removal Frequently Asked Questions Returning Merchandise for Service Starting Bios Setup Utility IntroductionStarting the Setup Utility Main SetupHow To Change the Configuration Data Build Date System Date/System TimeSupermicro X9DRG-HF Version Memory Information Total MemoryAdvanced Setup Configurations Boot FeaturesSocket 1 CPU Information/Socket 2 CPU Information Power ConfigurationCPU Configuration Clock Spread Spectrum CPU Speed64-bit Rtid Record Types IDsDCU Streamer Prefetcher Available when supported by the CPU MLC Streamer Prefetcher Available when supported by the CPUMLC Spatial Prefetch Available when supported by the CPU Active Processor CoresEist Available when Power Technology is set to Custom  CPU Power Management ConfigurationPower Technology Turbo Mode Available when Power Technology is set to CustomRecommended Short Duration Power Factory Long Duration Power LimitLong Duration Power Limit Energy/Performance BiasChipset Configuration North Bridge Integrated IO ConfigurationQPI Configuration Dram Rapl Mode Current Memory ModeMemory Mode Current Memory SpeedPatrol Scrub Channel InterleavingRank Interleaving Demand ScrubSouth Bridge Configuration SATA ConfigurationAhci Mode Sata ModeIDE Mode Aggressive Link Power ManagementSCU Storage Control Unit Configuration PCIe/PCI/PnP ConfigurationOnboard LAN Option ROM Select Maximum Read RequestAspm Support Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROMSOL Configuration Super IO ConfigurationSerial Port 1 Configuration Console Redirection Settings Serial Port Console RedirectionLegacy OS Redirection Resolution Recorder ModeResolution Stop BitsData Bits, Parity, Stop Bits ACPI SettingsOut-of-Band Management Port TPM Enable Status Intel TXT LT-SX Configuration ME SubsystemLink Speed NIC ConfigurationISCSI Initiator Name Wake on LANEvent Logs Change Smbios Event Log SettingsEnabling/Disabling Options Smbios Event Log PCI Error Logging Support Runtime Error Logging SupportMemory Correctable Error Threshold Erasing Settings Erase Event LogIpmi System Event LogBMC Network Configuration Station MAC Address BootSubnet Mask Gateway IP AddressAdministrator Password Delete Boot OptionDelete Boot Option User PasswordDiscard Changes and Exit Save Changes and ResetSave & Exit Save Options Save ChangesRestore User Defaults Restore Optimized DefaultsSave as User Defaults Boot OverrideX9 Ipmi Error Codes Bios Error Beep CodesBios Error Beep Codes X9DRG-HF/X9DRG-HTF Motherboard User’s Manual Installing Software Programs Driver/Tool Installation Display ScreenConfiguring SuperDoctor SuperDoctor III Interface Display Screen-II Remote Control X9DRG-HF/X9DRG-HTF Motherboard User’s Manual