TPM Enable/Disable Status
This item displays the status of TPM Enabled/Disabled state.
TPM Owner Status
This item displays the status of TPM Ownership.
IPMI Configuration
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that monitor and manage system health. Refer to Intel's website at www.intel.com.
IPMI Firmware Revision
This item displays the current IPMI firmware revision.
Status of BMC
Baseboard Management Controller (BMC) manages the interface between the sys- tem management software and platform hardware. This is an informational feature which displays the status code of the BMC micro controller.
View BMC System Event Log
This feature displays the BMC System Event Log (SEL). It shows the total number of BMC System Event entries. To view an event, select an Entry Number and press- ing <Enter> to display the information as shown on the screen.
•
•
•
•
•
•
•
•
•
•
Total Number of Entries
SEL Entry Number
SEL Record ID
SEL Record Type
Generator ID
Event Message Format Ver
Event Sensor Type
Event Sensor Number
Event Dir Type
Event Data.