Appendix B: Installing the Windows OS
Appendix B
Installing the Windows OS
After all hardware components have been installed, you must first configure Intel South Bridge RAID Settings before you install the Windows OS and other software drivers. To configure RAID settings, please refer to RAID Configuration User Guides posted on our website at www.supermicro.com/support/manuals.
B-1 Installing the Windows OS to a RAID System
1.Insert Microsoft's Windows XP/2003/2008/Vista Setup CD in the CD Driver, and the system will start booting up from CD.
2.Press the <F6> key when the
3.When the Windows OS Setup screen appears, press "S" to specify additional device(s).
4.Insert the driver
5.When the Windows OS Setup screen appears, press "S" to specify additional device(s).
6.Insert the driver
7.Choose the Intel(R) ICH10R SATA RAID Controller from the list indicated in the Windows OS Setup Screen, and press the <Enter> key.
8.Press the <Enter> key to continue the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are specified, press the <Enter> key to continue with the installation.
9.From the Windows OS Setup screen, press the <Enter> key. The Windows
OS Setup will automatically load all device files and then, continue the Win- dows OS installation.
10.After the Windows OS Installation is completed, the system will automatically reboot.