SUPER MICRO Computer 1.2b user manual 35V DIMMs

Page 36

X8DAH+/X8DAH+-F/X8DAH+(-F)-LR User's Manual

1.5V UDIMM Population for the Motherboard w/5600 Processors Installed

DIMM Slots per Channel

3

3

3

DIMMs Populated per Channel

1

2

3

DIMM Type (Unb.=

Unbuffered)

Unb. DDR3 ECC/Non-ECC

Unb. DDR3 ECC/Non-ECC

Not Available

Speeds (in MHz)

800,1066,1333

800,1066, 1333

Not Available

Ranks per DIMM (any combination; SR=Single Rank, DR=Dual Rank, QR=Quad Rank)

SR or DR

Mixing SR, DR

Not Available

Note 1: 1333 MHz for two DIMMs per channel is supported when Unbuf./ECC DIMMs are used.

Note 2: MIxing of 1.35V and 1.5V DIMMs is not recommended.

1.35V DIMMs

1.35V RDIMM Population for the Motherboard w/5600 Processors

Installed

DIMM Slots per Channel

3

3

3

3

3

DIMMs

 

DIMM Type

Populated

 

(Reg.=Registered)

per Channel

 

 

1

 

Reg. DDR3 ECC

 

1Reg. DDR3 ECC

2Reg. DDR3 ECC

2Reg. DDR3 ECC

3Not Available

Speeds (in MHz)

800,1066,1333

800 (Note 1)

800,1066 (Note 2)

800 (Note 3)

Not Available

Ranks per DIMM (any combination; SR=Single Rank, DR=Dual Rank, QR=Quad Rank)

SR or DR

QR

Mixing SR, DR

Mixing SR, DR, QR

Not Available

Note 1: 1333/1066 MHz QR RDIMMs will run at 800 MHz (-BIOS automatic downgrading).

Note 2: 1333 MHz SR/DR RDIMMs will run at 800 MHz (-BIOS automatic downgrading).

Note 3: 1333/1066 MHz SR/DR/QR RDIMMs will run at 800 MHz (-BIOS automatic downgrading).

Note 4: MIxing of 1.35V and 1.5V DIMMs is not recommended.

1.35V UDIMM Population for the Motherboard w/5600 Processors Installed

DIMM Slots per Channel

3

3

3

DIMMs

DIMM Type (Unb.=

Populated

Unbuffered)

per Channel

 

 

 

1Unb. DDR3 ECC

2Unb. DDR3 ECC

3Not Available

Speeds (in MHz)

800,1066,1333

800,1066

Not Available

Ranks per DIMM (any combination; SR=Single Rank, DR=Dual Rank, QR=Quad Rank)

SR or DR

Mixing SR, DR

Not Available

Note 1: 1333 MHz for two DIMMs per channel is supported when Unbuf./ECC DIMMs are used.

Note 2: MIxing of 1.35V and 1.5V DIMMs is not recommended.

Note 1: Due to OS limitations, some operating systems may not show more than 4 GB of memory.

Note 2: Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is dispropor- tional. (See the following Table.)

2-12

Image 36
Contents X8DAH+ X8DAH+-F X8DAH+-LR X8DAH+-F-LR Page About this Manual About this Motherboard Manual OrganizationConventions Used in the Manual Contacting Supermicro HeadquartersEurope Asia-PacificTable of Contents Vii Bios IntroductionChecklist OverviewX8DAH+/X8DAH+-F/X8DAH+-F-LR Image X8DAH+/X8DAH+-F/X8DAH+-F-LR Layout Differences between X8DAH+/-F/-LRYes Quick Reference Compact Flash Enabled Closed Enabled SMB to PCI/PCI-E Slots Open/Open DisabledVGA Enable Pins 1-2 Enabled X8DAH+-F/-LR only 1394-1/1394 Enable Pins 1-2 EnabledMotherboard Features MemoryChipset Acpi Features Expansion SlotsPC Health Monitoring Onboard I/ODimensions OtherCD/Diskette Utilities Introduction X8DAH+ System Diagram Block Diagram for the X8DAH+X8DAH+-F/-LR System Diagram Block Diagram for the X8DAH+-F/-LRChipset Overview Special Features PC Health MonitoringAcpi Features Slow Blinking LED for Suspend-State IndicatorMain Switch Override Mechanism System Resource AlertPower Supply Super I/OOverview of Winbond WPCM450 Controller For X8DAH+-F/-LR Only Page Motherboard Installation Installation InstructionsTools Needed Processor and Heatsink Installation Installing an LGA 1366 ProcessorSocket Clip Load Plate Plastic CapCPU Keys Load Plate Installing a CPU Heatsink Removing the Heatsink Memory Installation Dimm InstallationInstalling and Removing DIMMs Memory Support P1-DIMMs To Populate P1-DIMMs Branch P2-DIMMs To Populate P2-DIMMs BranchMemory Support for the Motherboard w/5500 CPUs Installed Memory Support for the Motherboard w/the 5600 CPUs Installed 35V DIMMs Possible System Memory Allocation & Availability TsegControl Panel Connectors/IO Ports Back Panel Connectors/IO PortsBack Panel Connectors ATX PS/2 Keyboard and PS/2 Mouse Ports Keyboard Purple Mouse GreenPS/2 Keyboard/Mouse Pin Definitions Video Connector X8DAH+-F/-LR Serial PortsCOM VGA X8DAH+-F/-LR only Serial Ports-COM1/COM2 Pin DefinitionsUniversal Serial Bus USB Back Panel USB USB 0/1, 2~5Front Panel USB Pin Definitions USB6/7, 8/9 Ethernet Ports NC No ConnectionLAN2 LAN1 Ipmi LAN X8DAH+-F/-LR only LAN Ports Pin DefinitionBack Panel High Definition Audio HD Audio CD &10-pin Audio HeadersHD Audio See the graphics above for details CD1 Pin Audio JF1 Header Pins Power ButtonFront Control Panel Power LED Front Control Panel Pin DefinitionsNMI Button NIC1/NIC2 LED Indicators HDD LEDPower Fail LED Overheat OH/Fan Fail LEDOH/Fan Fail & UID LEDs B. PWR Supply Fail Reset Button Power ButtonReset Button Pin Definitions JF1 Power Button Pin Definitions JF1Connecting Cables Power ConnectorsRequired Pin ATX PWR Reqd B/C.8-pin Processor PWR ReqdFan Headers Chassis IntrusionFan 1 B. Fan Fan CPU1 Fan CPU2 Fan Chassis IntrusionPower LED/Speaker Internal SpeakerInternal Speaker Buzzer B. PWR LED/Speaker Ieee 1394a Connection Overheat LED/Fan Fail JOH1CNF1 1394a-1 CNF2 1394a-2Power SMB I2C Connector System Management BusSMB Header Pin Definitions Jumper Settings Glan Enable/DisableEnabled Glan Port 1/2 EnableWatch Dog Enable/Disable Clear Cmos Watch Dog EnableWatch Dog Jumper Settings JWD Cmos ClearCompact Flash Enable I2C for PCI/PCI-E slots Jumper SettingsCompact Flash Card Enable Jumper Settings I2C Bus to PCI-Exp. SlotsVGA Enable X8DAH+-F/-LR Only 1394a-1/1394a-2 EnableVGA Enable 1394a EnableOnboard LED Indicators Glan LEDsIpmi Dedicated LAN LEDs X8DAH+- F/-LR Onboard Power LED BMC Heartbeat LED X8DAH+-FOnboard PWR LED B. BMC Heartbeat LED Floppy Connector Floppy Drive, Serial ATA and SAS ConnectionsIDE Connector BaleSerial ATA Ports Sata 0~5Serial ATA Pin Definitions Troubleshooting Procedures Before Power OnNo Power Losing the System’s Setup Configuration Memory ErrorsNo Video Technical Support Procedures Frequently Asked QuestionsReturning Merchandise for Service Starting Bios Setup Utility IntroductionMain Setup How To Change the Configuration DataStarting the Setup Utility System Time/System Date SuperMicro X8DAHProcessor System MemoryAdvanced Setup Configurations Boot FeaturePower Configuration Processor and Clock Options Intel AES-NI Available when supported by the OS and the CPU Active Processor CoresIntel Eist Technology CPU Bridge Configuration Advanced Chipset ControlMemory Mode QPI FrequencyQPI L0s and L1 Memory FrequencyNorth Bridge Configuration South Bridge Configuration IDE/SATA Configuration SATA#1 ConfigurationConfigure SATA#1 as SATA#2 ConfigurationLBA/Large Mode PIO ModePIO Mode Select Options Option Selected Max. Transfer Rate TypePCI/PnP Configuration PCI Latency Timer Boot Graphics Adapter PriorityPlug & Play OS PCI IDE BusMasterSuper IO Device Configuration Remote Access ConfigurationHardware Health Monitor CPU 1 Temperature/CPU 2 Temperature/System Temperature CPU 1 Temperature/CPU 2 TemperatureFan Speed Readings Fan Speed Control ModesVoltage Readings ACPI Configuration Trusted Computing IPMI Configuration View BMC System Event LogSet LAN Configuration Event Log Configuration Security Settings Supervisor PasswordUser Password Change Supervisor PasswordBoot Configuration Boot Device PriorityPassword Check Available when a password is installed Boot Sector Virus ProtectionHard Disk Drives Removable DrivesCD/DVD Drives USB DrivesExit Options Bios Error Beep Codes Bios Error Beep CodesBeep Code Error Message Description Page Appendix B Installing the Windows OS Installing the Windows OS to a RAID SystemInstalling the Windows OS to a Non-RAID System Installing Software Programs Driver/Tool Installation Display ScreenConfiguring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control