SUPER MICRO Computer X9SPV-F, X9SPV-LN4F Advanced Chipset Control System Agent SA Configuration

X9SPV-F/LN4F Motherboard User Manual

Advanced Chipset Control

WARNING: Setting the wrong values in the following sections may cause the system to malfunction.

System Agent (SA) Configuration

This submenu allows you to configure System Agent Parameters.

Memory Configuration

This section displays memory status such as memory speed and total memory.

Memory Frequency Limiter

Use this item to select the maximum memory frequency (in Mhz). The options are Auto, 1067, 1333, 1600, 1867, 2133, 2400, and 2667.

DDR Selection

Use this item to select the type of DDR. The options are DDR3, DDR3L, and Auto.

DDR Reset Wait Time

Enter the amount of time (in nano seconds) to wait for switch DDR voltage. The minimum value is 20ns. The default value is 2000000.

ECC Support

Select Enabled to support ECC. The options are Enabled and Disabled.

Memory Scrambler

Select Enabled to support Memory Scrambler. The options are Enabled and Disabled.

VT-d

Select Enabled to enable Intel's Virtualization Technology support for Direct I/O VT-d by reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with greater reliability, security and availability in networking and data-sharing. The settings are Enabled and Disabled.

PEG0 - Gen X

This feature selects the speed of the PEG0 port. The options are Auto, Gen1, Gen2, and Gen3.

4-8