SUPER MICRO Computer 6026TT-GTRF, 6026TT-GIBQRF, 6026TT-GIBXRF XGeneral Whea Configuration

Page 85

Chapter 7: BIOS

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system. The options are Enabled and Disabled.

Headless Mode

This feature is used to enable system to function without a keyboard, monitor or mouse attached The options are Enabled and Disabled.

High Performance Event Timer

Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing multimedia streams, providing smooth playback and reducing the de- pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc- tion embedded in the CPU. The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer. The options are Enabled and Disabled.

XGeneral WHEA Configuration

WHEA Support

Select Enabled to enable Windows Hardware Error Architecture (WHEA) sup- port which will provide a common infrastructure for handling hardware errors on Windows platforms in order to reduce system crashes due to hardware errors and improvesystem recovery and health monitoring. The default setting is Enabled.

XIPMI Configuration (X8DTT-HF/-HIBXF/-HIBQF Only)

Intelligent Platform Management Interface (IPMI) is a set of common interfaces that IT administrators can use to monitor system health and to manage the system as a whole. For more information on the IPMI specifications, please visit Intel's website at www.intel.com.

Status of BMC

Baseboard Management Controller (BMC) manages the interface between system management software and platform hardware. This is an informational feature which returns the status code of the BMC micro controller.

IPMI Firmware Revision

This item indicates the revision number of the current IPMI Firmware.

7-19

Image 85
Contents Super Manual Revision Release Date November 16 About This Manual PrefaceManual Organization Advanced Serverboard Setup System SafetyAdvanced Chassis Setup BiosPreface Table of Contents System Interface Appendix a Bios Error Beep Codes Overview Chapter IntroductionProcessors Memory Serverboard FeaturesSerial ATA PCI Expansion SlotsOnboard Controllers/Ports Other FeaturesGraphics Controller InfiniBandIntel 5520 Chipset System Block Diagram Server Chassis Features GPU Subsystem 2U Twin System NotesNodes Sata Backplane/DrivesHeadquarters Contacting SupermicroEurope Asia-PacificPage Preparing for Setup Chapter Server InstallationUnpacking the System Choosing a Setup Location Rack Mounting Considerations Ambient Operating TemperatureRemoving the Protective Film Removing the Protective FilmRack Mounting Instructions Rail AssemblySeparating the Sections of the Rack Rails Separating the Inner and Outer RailsInstalling the Inner Rails Installing the Inner Rail ExtensionsOuter Rack Rails Installing the Outer Rails to the RackInstalling the Chassis into a Rack Installing Into the RackAccessing the Inside of a Node Figure Checking the Serverboard SetupChecking the Components and Setup Providing Power Preparing to Power OnChecking the Sata drives Checking the AirflowRemoving a Node from the System Page Chapter System Interface PowerControl Panel Buttons Sata Drive Carrier LEDs Control Panel LEDsOverheat/Fan Fail Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsHandling the Serverboard Chapter Advanced Serverboard SetupI/O Ports I/O PortsInstalling LGA1366 Processors Processor and Heatsink InstallationCPU Installing a CPU Heatsink Removing the Heatsink Installing Memory Modules Installing MemoryMemory Support Front View Dimm Installation NotchAdding PCI Cards PCI Card InstallationPCI Express Slot LE2 Serverboard DetailsServerboard Quick Reference Connector DescriptionJumper Description Front Panel Accessible Add-on Card Header JF2 Connector DefinitionsNMI Header Internal BuzzerFan Header Video ConnectorUniversal Serial Bus USB InfiniBand Connection X8DTT-HIBXF+/ HIBQF+ Ethernet PortsUnit Identifier Switches System ResetSerial Ports Cmos Clear Jumper SettingsTo Clear Cmos Watch Dog Enable/Disable LAN1/LAN2 Enable/DisableVGA Enable/Disable InfiniBand LED Indicators LEB1/LEB2 Onboard IndicatorsOnboard Power LED LAN1/LAN2 LEDsBMC Activity LED LE2 Serial ATA PortsRear UID LED LE4 Serial ATA ConnectionsInstalling Additional Drivers 12 Configuring Supero Doctor Page Chapter Advanced Chassis Setup System Fans Control PanelSystem Fan Failure Fan ConfigurationChanging a System Fan Installing and Removing Hard Drives Hard Drive Installation/RemovalInstalling a Hard Drive into the Drive Carrier OverviewRemoving a Dummy Drive Tray Installing/Removing Hot-swap DrivesNode a Node B Removing a Node Node Installation/RemovalRemoving a System Node Power Supply Installing the Air ShroudsInstalling an Air Shroud Removing/Replacing the Power Supply FigureRemoving the Power Supply Release Tab How To Change the Configuration Data Starting Bios Setup UtilityChapter IntroductionStarting the Setup Utility Main SetupSystem Overview System Time/System DateAMI Bios Core Version Bios Build DateProcessor CPU TypeXboot Features Advanced Setup ConfigurationsXProcessor and Clock Options XPower ConfigurationC1E Support Hardware Prefetcher Available when supported by the CPUActive Processor Cores Intel Eist TechnologyXcpu Bridge Configuration XAdvanced Chipset ControlMemory ECC Error Threshold Memory ModeQPI L0s and L1 Memory FrequencyGuardband Temperature Hysteresis TemperatureInlet Temperature Temperature RiseXSouthBridge Configuration XNorth Bridge ConfigurationXIDE/SATA Configuration PIO Mode LBA/Large ModeSATA#2 Configuration TypeDMA Mode XPCI/PnP Configuration XSuper IO Device Configuration XRemote Access ConfigurationCPU Overheat Alarm Sredir Memory Display DelayXHardware Health Monitor Terminal TypeCPU Temperature CPU Temperature/System TemperatureXacpi Configuration Acpi Version Features Acpi Apic SupportFan Speed Control Monitor Fan1 ~ Fan 4 ReadingXipmi Configuration X8DTT-HF/-HIBXF/-HIBQF Only XGeneral Whea ConfigurationXSet LAN Configuration XView BMC System Event LogXIP Address Configuration Parameter SelectorXSubnet Mask Configuration Xmac Address ConfigurationSubnet Mask XGateway Address ConfigurationCurrent Subnet Mask in BMC Gateway AddressXdmi Event Log Security SettingsXBoot Device Priority Boot ConfigurationPassword Check Boot Sector Virus ProtectionXRemovable Drives XHard Disk DrivesXCD/DVD Drives Exit Options Bios RecoveryBoot Sector Recovery from a USB Device How to Recover the Amibios Image the Main Bios BlockHow to use Serial Flash for Boot Sector Recovery Boot Sector Recovery from a Serial Port Serial FlashPage Page Bios Error Beep Codes Appendix a Bios Error Beep CodesBios Error Beep Codes Page Installing Windows for a RAID System Appendix B Installing WindowsInstalling Windows for a Non-RAID System Appendix C System Specifications BiosChassis Regulatory Compliance