SUPER MICRO Computer 6015TC-10G, 6015TC-T manual NMI Button, Fan Headers, Universal Serial Bus USB

Page 48

SUPERSERVER 6015TC-T/6015TC-10G User's Manual

NMI Button

The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin deﬁnitions.

Fan Headers

The X7DCT/X7DCT-10G has three 4-pin fan headers. See the table on the right for pin deﬁnitions.

Note: The onboard fan speed is con- trolled by the CPU die temperature.

Universal Serial Bus (USB)

There are two Universal Serial Bus ports located on the I/O panel, two USB headers located on the serverboard and a third USB port (USB4) located onboard near the SGPIO header. The headers, labeled USB2 and USB3, can be used to

NMI Button

Pin Deﬁnitions (JF1)

Pin# Deﬁnition

19Control

20Ground

Fan Header

Pin Deﬁnitions

(FAN1-3)

Pin# Deﬁnition

1Ground (Black)

2+12V (Red)

3Tachometer

4PWM Control

USB Ports Pin

Deﬁnitions (USB0/1/4)

Pin# Deﬁnition

1+5V

2PO-

3PO+

4Ground

5N/A

USB Headers

Pin Deﬁnitions (USB2/3)

provide front side USB access (cables not included). See the tables on the right for pin deﬁnitions.

USB2

Pin # Deﬁnition

1+5V

2PO-

3PO+

4Ground

5Key

USB3

Pin # Deﬁnition

1+5V

2PO-

3PO+

4Ground

5No connection

5-14

Image 48

Contents Super Manual Revision 1.0a Release Date November 11 Preface About This ManualManual Organization System Safety Advanced Serverboard SetupAdvanced Chassis Setup BiosPreface Table of Contents System Interface Bios Chapter Introduction OverviewServerboard Features Processors MemorySerial ATA PCI Expansion SlotsOther Features ATI Graphics ControllerOnboard Controllers/Ports Intel 5100 Chipset System Block Diagram Server Chassis Features 1U Twin System Notes Sata Backplane/DrivesContacting Supermicro HeadquartersEurope Asia-PaciﬁcPage Chapter Server Installation Preparing for SetupChoosing a Setup Location Unpacking the SystemPage Ambient Operating Temperature Rack Mounting ConsiderationsInstalling the System into a Rack Installing the Inner RailsIdentifying the Sections of the Rack Rails Installing the Outer Rails Installing the Rack RailsChecking the Serverboard Setup Installing the Server into the RackInstalling the Server into a Telco Rack Accessing the Inside of the SystemInstalling the Server into a Rack Checking the Components and SetupPreparing to Power On Providing PowerChecking the Sata drives Checking the AirﬂowAccessing the Inside of the System Page Reset PowerChapter System Interface Control Panel ButtonsControl Panel LEDs Overheat/Fan FailSata Drive Carrier LEDs Page Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Serverboard Setup PrecautionsHandling the Serverboard Serverboard Installation UnpackingCheck Compatibility of Serverboard Ports and I/O Shield Mounting the Serverboard onto the Serverboard TrayConnecting Cables Connecting Data CablesConnecting Power Cables Connecting the Control Panel I/O PortsProcessor and Heatsink Installation Installing the ProcessorCPU installed in socket PnP cap released From load plate Installing the Heatsink Removing the HeatsinkInstalling Memory Installing Memory ModulesMemory Support PCI Card Installation Adding PCI CardsPCI-Express Slot Serverboard Details X7DCT-10G LayoutJumper Description Default Setting Connector DescriptionX7DCT/X7DCT-10G Quick Reference Connector Deﬁnitions ATX Power ConnectorAuxiliary Power Connector Pwon ConnectorPower On LED Overheat LED OHNMI Button Fan HeadersUniversal Serial Bus USB I2C Power Connector Serial PortsSgpio Header LAN1/2 Ethernet PortsJumper Settings VGA Enable/DisableCmos Clear To Clear CmosLAN1/LAN2 Enable/Disable Gb LAN Enable/DisableWatch Dog Enable/Disable Onboard Indicators Gb LAN LED Indicator LED2Onboard Power LED LED3 LAN1/LAN2 LEDsInstalling Additional Drivers 13 Conﬁguring Supero Doctor Advanced Serverboard Setup Page Chapter Advanced Chassis Setup Control Panel Chassis Front ViewDrive Bay Installation/Removal Accessing the Drive BaysSystem Fans System Fan FailureInstalling/Removing Hot-swap Sata Drives Mounting a Drive in a CarrierPower Supply Power Supply FailureReplacing the Power Supply Removing the Power SupplyRemoving the Power Supply System Bios How To Change the Conﬁguration DataStarting the Setup Utility ChapterRunning Setup Main Bios SetupDefault settings are in bold text unless otherwise noted Press the Delete key to enter SetupMain Bios Setup Menu Main Setup Features Bios DateSystem Time System DateSata Port1, Sata Port2, Sata Port3 and Sata Port4 TypeLBA Format Total SectorsLBA Mode Control Transfer ModeUltra DMA Mode Native Mode OperationAdvanced Setup XBoot FeaturesQuietBoot Mode Post ErrorsAcpi Mode XMemory Cache Cache Base 0-512K Cache Base 512K-640KCache Extended Memory Discrete Mtrr AllocationXpci Conﬁguration XPCI-ExpXAdvanced Chipset Control Enable Multi-Media Timer Patrol ScrubbingDemand Scrubbing USB Host ControllerMachine Checking Available when supported by the CPU C1 Enhanced Mode Available if supported by the CPUHardware Prefetcher Available when supported by the CPU Xcpu Cache Control XI/O Device ConﬁgurationXdmi Event Logging XConsole Redirection XHardware Monitor Logic Fan1-Fan3Fan Speed Control Modes Voltage MonitoringIpmi Speciﬁcation Version Firmware VersionSystem Event Logging Clear System Event LoggingXSystem Event Log/System Event Log List Mode Security XRealtime Sensor DataSupervisor Password Is User Password IsSet Supervisor Password Set User PasswordBoot Password on BootBoot Priority Order/Excluded from Boot Orders Load Setup Defaults ExitExit Saving Changes Exit Discarding ChangesSave Changes Appendix a Bios Post Messages System Cmos checksum bad Default conﬁguration used System timer errorReal time clock error Check date and time settingsFail-Safe Timer NMI Failed Allocation Error for deviceEntering Setup Eisa Cmos not writeablePS/2 Mouse Boot Summary Screen Press F1 to resume, F2 to Setup, F3 for previousDevice IRQ conﬂict Nnnn kB Extended RAM PassedPress F2 to enter Setup System Bios shadowedVideo Bios shadowed PS/2 MousePage Appendix B Bios Post Codes Recoverable Post ErrorsTerminal Post Errors Post Code DescriptionPost Code Description Post Code Description Post Code Description Appendix B Bios Post Codes Page Appendix C System Speciﬁcations ServerboardWeight Power SupplySystem Cooling System Input RequirementsAppendix C System Speciﬁcations