SUPER MICRO Computer 6015TC-T manual Eisa Cmos not writeable, DMA Test Failed, Software NMI Failed

Page 89

Appendix A: BIOS POST Messages

slows system performance considerably.

CPU ID:

CPU socket number for Multi-Processor error.

EISA CMOS not writeable

ServerBIOS2 test error: Cannot write to EISA CMOS.

DMA Test Failed

ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.

Software NMI Failed

ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).

Fail-Safe Timer NMI Failed

ServerBIOS2 test error: Fail-Safe Timer takes too long.

device Address Conﬂict

Address conﬂict for speciﬁed device.

Allocation Error for: device

Run ISA or EISA Conﬁguration Utility to resolve resource conﬂict for the speciﬁed device.

CD ROM Drive

CD ROM Drive identiﬁed.

Entering SETUP ...

Starting Setup program

Failing Bits: nnnn

The hex number nnnn is a map of the bits at the RAM address which failed the memory test. Each 1 (one) in the map indicates a failed bit. See errors 230, 231, or 232 above for offset address of the failure in System, Extended, or Shadow memory.

Fixed Disk n

Fixed disk n (0-3) identiﬁed.

Invalid System Conﬁguration Data

Problem with NVRAM (CMOS) data.

A-3

Image 89

Contents Super Manual Revision 1.0a Release Date November 11 Manual Organization PrefaceAbout This Manual Advanced Serverboard Setup System SafetyAdvanced Chassis Setup BiosPreface Table of Contents System Interface Bios Overview Chapter IntroductionProcessors Memory Serverboard FeaturesSerial ATA PCI Expansion SlotsOnboard Controllers/Ports Other FeaturesATI Graphics Controller Intel 5100 Chipset System Block Diagram Server Chassis Features Sata Backplane/Drives 1U Twin System NotesHeadquarters Contacting SupermicroEurope Asia-PaciﬁcPage Preparing for Setup Chapter Server InstallationChoosing a Setup Location Unpacking the SystemPage Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackInstalling the Inner Rails Installing the Rack Rails Installing the Outer RailsInstalling the Server into the Rack Checking the Serverboard SetupInstalling the Server into a Telco Rack Accessing the Inside of the SystemChecking the Components and Setup Installing the Server into a RackProviding Power Preparing to Power OnChecking the Sata drives Checking the AirﬂowAccessing the Inside of the System Page Power ResetChapter System Interface Control Panel ButtonsOverheat/Fan Fail Control Panel LEDsSata Drive Carrier LEDs Page Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsHandling the Serverboard Chapter Advanced Serverboard SetupPrecautions Unpacking Serverboard InstallationCheck Compatibility of Serverboard Ports and I/O Shield Mounting the Serverboard onto the Serverboard TrayConnecting Power Cables Connecting CablesConnecting Data Cables I/O Ports Connecting the Control PanelInstalling the Processor Processor and Heatsink InstallationCPU installed in socket PnP cap released From load plate Removing the Heatsink Installing the HeatsinkMemory Support Installing MemoryInstalling Memory Modules PCI-Express Slot PCI Card InstallationAdding PCI Cards X7DCT-10G Layout Serverboard DetailsX7DCT/X7DCT-10G Quick Reference Jumper Description Default SettingConnector Description ATX Power Connector Connector DeﬁnitionsAuxiliary Power Connector Pwon ConnectorOverheat LED OH Power On LEDUniversal Serial Bus USB NMI ButtonFan Headers Serial Ports I2C Power ConnectorSgpio Header LAN1/2 Ethernet PortsVGA Enable/Disable Jumper SettingsCmos Clear To Clear CmosWatch Dog Enable/Disable LAN1/LAN2 Enable/DisableGb LAN Enable/Disable Gb LAN LED Indicator LED2 Onboard IndicatorsOnboard Power LED LED3 LAN1/LAN2 LEDsInstalling Additional Drivers 13 Conﬁguring Supero Doctor Advanced Serverboard Setup Page Chapter Advanced Chassis Setup Chassis Front View Control PanelAccessing the Drive Bays Drive Bay Installation/RemovalSystem Fans System Fan FailureMounting a Drive in a Carrier Installing/Removing Hot-swap Sata DrivesPower Supply Failure Power SupplyReplacing the Power Supply Removing the Power SupplyRemoving the Power Supply How To Change the Conﬁguration Data System BiosStarting the Setup Utility ChapterMain Bios Setup Running SetupDefault settings are in bold text unless otherwise noted Press the Delete key to enter SetupBios Date Main Bios Setup Menu Main Setup FeaturesSystem Time System DateType Sata Port1, Sata Port2, Sata Port3 and Sata Port4LBA Format Total SectorsTransfer Mode LBA Mode ControlUltra DMA Mode Native Mode OperationXBoot Features Advanced SetupAcpi Mode QuietBoot ModePost Errors XMemory Cache Cache Base 512K-640K Cache Base 0-512KCache Extended Memory Discrete Mtrr AllocationXPCI-Exp Xpci ConﬁgurationXAdvanced Chipset Control Patrol Scrubbing Enable Multi-Media TimerDemand Scrubbing USB Host ControllerHardware Prefetcher Available when supported by the CPU Machine Checking Available when supported by the CPUC1 Enhanced Mode Available if supported by the CPU XI/O Device Conﬁguration Xcpu Cache ControlXdmi Event Logging XConsole Redirection Fan1-Fan3 XHardware Monitor LogicFan Speed Control Modes Voltage MonitoringFirmware Version Ipmi Speciﬁcation VersionSystem Event Logging Clear System Event LoggingXSystem Event Log/System Event Log List Mode XRealtime Sensor Data SecurityUser Password Is Supervisor Password IsSet Supervisor Password Set User PasswordBoot Priority Order/Excluded from Boot Orders BootPassword on Boot Exit Load Setup DefaultsExit Saving Changes Exit Discarding Changes Save Changes Appendix a Bios Post Messages System timer error System Cmos checksum bad Default conﬁguration usedReal time clock error Check date and time settingsAllocation Error for device Fail-Safe Timer NMI FailedEntering Setup Eisa Cmos not writeablePress F1 to resume, F2 to Setup, F3 for previous PS/2 Mouse Boot Summary ScreenDevice IRQ conﬂict Nnnn kB Extended RAM PassedSystem Bios shadowed Press F2 to enter SetupVideo Bios shadowed PS/2 MousePage Recoverable Post Errors Appendix B Bios Post CodesTerminal Post Errors Post Code DescriptionPost Code Description Post Code Description Post Code Description Appendix B Bios Post Codes Page Serverboard Appendix C System SpeciﬁcationsPower Supply WeightSystem Cooling System Input RequirementsAppendix C System Speciﬁcations