SMC Networks HNC-63-INT, 500082 manual Quality Assurance

Page 14

Rev 05

Chapter 3 - Quality Assurance

Quality Assurance

Remove the coil top and place the phantom positioner (part number 102485) and the phantom (part number 102690) as shown in the figures below. Replace the coil top.

Connect the coil to the system as detailed in Chapter 2, "Connecting the cable." Landmark on the the phantom through the small window in the top of the coil.

Follow the proceedure found on the next 8 pages.

Image 14

Contents Rev Licenses and Trademarks Introduction CompatibilityHNC Neurovascular Array Coil GrasphereTable of Contents Training Quality Assurance Indications Contra- indications Patient SafetyPrecautions Emergency Procedures Technical Considerations Array Coil Positioning the HNC-63-INT Coil on the Patient TablePositioning Patient Synergy MultiConnect SMC Connecting Cable Left Side Patient Interface Control Unit Picu Right Side Patient Interface Control Unit PicuQuality Assurance MTC Rev Save raw data Yes Rev SNR Calulations Example SNR Calulations SNR Calulations Example SNR Calulations Scanning Set Up Head and Neck Imaging Selecting the Active CoilScanning Step by Step Scan Protocols Cleaning StorageRev