SMC Networks HNC-63-INT, 500082 manual Scanning Step by Step

Page 24

Rev 05

Scanning

Step by Step

Scan Select: Software Release 8.1.1, Choose "3IB-MRIDEVIC", Software Releases above 8.1.1, choose "SMC-MRI".

Select Channel combination(s):
HEAD only: Select	Ch. combination 2
NECK only: Select	Ch. combination	3,4,5
HEAD & NECK: Select	Ch. combination	2,3,4,5

Plan Slices

Confirm Planning

Geometry Page: Homogeneity Correction, Select "NONE"

Start Scan

IMPORTANT: Upon scan completion, you must change channel combination if imaging a different region. System will default to last Channel combination when another scan is Added.

24

Image 24

Contents Rev Licenses and Trademarks Introduction CompatibilityHNC Neurovascular Array Coil GrasphereTable of Contents Patient Safety PrecautionsTraining Quality Assurance Indications Contra- indications Emergency Procedures Technical Considerations Array Coil Positioning the HNC-63-INT Coil on the Patient TablePositioning Patient Synergy MultiConnect SMC Connecting Cable Left Side Patient Interface Control Unit Picu Right Side Patient Interface Control Unit PicuQuality Assurance MTC Rev Save raw data Yes Rev SNR Calulations Example SNR Calulations SNR Calulations Example SNR Calulations Scanning Set Up Head and Neck Imaging Selecting the Active CoilScanning Step by Step Scan Protocols Cleaning StorageRev