Mtc

Run a SURVEY scan using the parameters listed below.

TIP: Save this SURVEY scan for future QA scans.

An example of the SURVEY images is on page 15.

Geometry		SPIR	no
CoilSelection	3IB-MRIDevic	TFEprepulse	invert
-channelCombination	2345	-sliceselection	no
-connection	d	-delay	shortest
Multi Coil	no	MTC	no
Homogeneitycorrection none		SARmode	default
FOV(mm)	400.00	Gradient mode	regular
RFOV(%)	100.00
Foldoversuppression	no	Motion
Matrixscan	256
-reconstruction	256	Cardiac synchronisation	no
Scanpercentage(%)	50.00	Respiratory compensation	no
Stacks	3	Flow compensation	no
-current	A	NSA	1
-type	parallel
-slices	3	Dyn/ang
-slicethickness(mm)	10.00	Angio	no
-slice gap	userdefined	Quantitative flow	no
- - gap (mm)	10.00	Manual start	no
-sliceorientation	sagittal	Dynamic study	no
-foldover direction	AP
Slicescanorder	default	Postproc
Stackdisplayorder	no	Preparation phases	auto
PlanAlign	no	MIP/MPR	no
RESTslabs	0	Images:	O:M no no no
Patientposition	headfirst	Autoview image	M
-orientation	supine	Reference tissue	White matter
		Preset window contrast	soft
Contrast		Reconstruction mode	immediate
Scanmode	M2D	Save raw data	no
-technique	FFE	Push to workstation	no
Contrastenhancement	T1	Hardcopy protocol	no
FastImagingmode	TFE	Ringing filter	no
-shotmode	multi-shot	Silent mode	no
TFEfactor	42
-shot interval	shortest	Offc/ang	no
-profile order	linear	Stacks	3
Echoes	1	-current	A
-partialecho	no	Stack Offc.AP (P=+mm)	-20.00
TE	shortest	RL (L=+mm)	0.00
Flipangle(deg)	20.00	FH (H=+mm)	0.00
TR	userdefined	Ang. AP (deg)	0.00
-(ms)	15.00	RL (deg)	-0.00
HalfScan	no	FH (deg)	-0.00
Water fat shift	maximum
Shim	no