SMC Networks SMC6724L2 manual Fiber Optic Devices

Page 43

MAKING NETWORK CONNECTIONS

Fiber Optic Devices

An optional slide-in 1000BASE-SX module may be used for a backbone connection between switches, or for connecting to a high-speed server.

Each fiber optic port requires 50/125 or 62.5/125 micron multimode fiber optic cabling with an SC connector at both ends. If you need to connect to a device with 62.5/125 micron cable that has ST-type connectors, SMC provides an optional SC-ST Converter (Part Number: 99-012034-091).

Caution: This switch uses lasers to transmit signals over fiber optic cable. The lasers are compliant with the requirements of a Class 1 Laser Product and are inherently eye safe in normal operation. However, you should never look directly at a transmit port when it is powered on.

1.Remove and keep the SC port’s rubber cover. When not connected to a fiber cable, the rubber cover should be replaced to protect the optics.

2.Check that the fiber terminators are clean. You can clean the cable plugs by wiping them gently with a clean tissue or cotton ball moistened with a little ethanol. Dirty fiber terminators on fiber optic cables will impair the quality of the light transmitted through the cable and lead to degraded performance on the port.

3.Connect one end of the cable to the SC port on the switch and the other end to the SC port on the other device. Since SC connectors are keyed, the cable can be attached in only one orientation.

4-5

Image 43

Contents TigerSwitch 10/100 Page TigerSwitch 10/100 Installation Guide Trademarks Limited Warranty Limited Warranty FCC Class a CompliancesEC Conformance Declaration Class a Industry Canada Class a Underwriters Laboratories Compliance Statement Safety ComplianceIii Warnhinweis Faseroptikanschlüsse Optische SicherheitWichtige Sicherheitshinweise Germany Table of Contents Troubleshooting Installing the SwitchMaking Network Connections Vii Viii Overview Chapter About Tigerswitch 10/100Management Options Switch Architecture10BASE-T/100BASE-TX Ports SMC6724L2 Description of HardwarePort and System LEDs Status LEDsSpanning Tree Protocol Switch ManagementVLANs Multicast SwitchingTraffic Priority Optional Media Extender Module Power Supply ReceptacleOptional 1000BASE-SX Module SMC6724L2GSSC Connectivity Features and BenefitsExpandability Management PerformanceAbout the Tigerswitch 10/100 Chapter Network Planning Introduction to SwitchingCollapsed Backbone Sample ApplicationsMaking Vlan Connections Remote Connections with Fiber CableMaking Vlan Connections Mbps Gigabit Ethernet Collision Domain Connectivity RulesMbps Fast Ethernet Collision Domain SMC 5-4-3 Rule Maximum Network Diameter Using RepeatersMbps Ethernet Collision Domain Maximum Fast Ethernet Cable DistanceApplication Notes Network Planning Selecting a Site Installing the SwitchPackage Contents Equipment ChecklistOptional Rack-Mounting Equipment Rack Mounting MountingAttaching the Brackets Attaching the Adhesive Feet Desktop or Shelf MountingPower Receptacle Connecting to a Power SourceCabling Guidelines Connecting Network DevicesChapter Making Network Connections Twisted-Pair Devices Crossover/Straight-Through Wiring Requirement Making Twisted-Pair Connections Connecting to PCs, Servers, Hubs and SwitchesWiring Closet Connections Wiring Closet ConnectionsFiber Optic Devices Making SC Port Connections Diagnosing Switch Indicators Appendix a TroubleshootingInstallation Power and Cooling ProblemsIn-Band Access Troubleshooting Troubleshooting Appendix B Cables SpecificationsTwisted-Pair Cable and Pin Assignments Figure B-1. RJ-45 Connector Pin Numbers100BASE-TX/10BASE-T Pin Assignments Straight-Through WiringCrossover Wiring Figure B-2. DB-9 Console Port Pin Numbers Console Port Pin AssignmentsConsole Port to 9-Pin COM Port on PC DB-9 Port Pin AssignmentsConsole Port to 25-Pin DCE Port on Modem Console Port to 25-Pin DTE Port on PC Cables Physical Characteristics Appendix C SpecificationsPower Consumption WeightTemperature Power SupplySwitch Features Management Features Standards WarrantyCompliances Standards Slide-in Module1000BASE-SX Extender Module ModelAppendix D Ordering Information Ordering Information Bandwidth GlossaryGlossary-1 Auto-NegotiationGlossary-2 Glossary-3 Glossary-4 Network Diameter RJ-45 ConnectorSwitched Ports Glossary-5Glossary-6 Index-1 IndexIndex-2 Index-3 Index-4 Page Internet