SMC Networks SMC6724L2 manual Glossary-2

Page 66

Class I Repeater

Fast Ethernet repeater that is principally used to connect different physical signaling systems (e.g., 100BASE-TX, 100BASE-FX) and that has an internal delay such that only one repeater of this type can reside within a single collision domain when maximum cable lengths are used.

Class II Repeater

Fast Ethernet repeater that typically supports a single physical signaling system (e.g., 100BASE-TX, or 100BASE-FX) and that has a smaller internal delay so that two such repeaters can reside within a single collision domain when maximum cable lengths are used.

Collision

A condition in which packets transmitted over the cable interfere with each other. Their interference makes both signals unintelligible.

Collision Domain

Single CSMA/CD LAN segment.

CSMA/CD

Carrier Sense Multiple Access/Collision Detect is the communication method employed by Ethernet and Fast Ethernet.

Crossover Port

Twisted-pair port with a built-in wiring crossover.

End Station

A workstation, server, or other device that does not act as a network interconnection.

Glossary-2

Image 66
Contents TigerSwitch 10/100 Page TigerSwitch 10/100 Installation Guide Trademarks Limited Warranty Limited Warranty Compliances FCC Class aEC Conformance Declaration Class a Industry Canada Class a Warnhinweis Faseroptikanschlüsse Optische Sicherheit Safety ComplianceIii Underwriters Laboratories Compliance StatementWichtige Sicherheitshinweise Germany Table of Contents Installing the Switch TroubleshootingMaking Network Connections Vii Viii Chapter About Tigerswitch 10/100 OverviewSwitch Architecture Management OptionsDescription of Hardware 10BASE-T/100BASE-TX Ports SMC6724L2Status LEDs Port and System LEDsSwitch Management Spanning Tree ProtocolMulticast Switching VLANsTraffic Priority Power Supply Receptacle Optional Media Extender ModuleOptional 1000BASE-SX Module SMC6724L2GSSC Features and Benefits ConnectivityExpandability Performance ManagementAbout the Tigerswitch 10/100 Introduction to Switching Chapter Network PlanningSample Applications Collapsed BackboneRemote Connections with Fiber Cable Making Vlan ConnectionsMaking Vlan Connections Connectivity Rules Mbps Gigabit Ethernet Collision DomainMbps Fast Ethernet Collision Domain Maximum Fast Ethernet Cable Distance Maximum Network Diameter Using RepeatersMbps Ethernet Collision Domain SMC 5-4-3 RuleApplication Notes Network Planning Installing the Switch Selecting a SiteEquipment Checklist Package ContentsOptional Rack-Mounting Equipment Mounting Rack MountingAttaching the Brackets Desktop or Shelf Mounting Attaching the Adhesive FeetConnecting to a Power Source Power ReceptacleTwisted-Pair Devices Connecting Network DevicesChapter Making Network Connections Cabling GuidelinesCrossover/Straight-Through Wiring Requirement Connecting to PCs, Servers, Hubs and Switches Making Twisted-Pair ConnectionsWiring Closet Connections Wiring Closet ConnectionsFiber Optic Devices Making SC Port Connections Appendix a Troubleshooting Diagnosing Switch IndicatorsPower and Cooling Problems InstallationIn-Band Access Troubleshooting Troubleshooting Specifications Appendix B CablesFigure B-1. RJ-45 Connector Pin Numbers Twisted-Pair Cable and Pin AssignmentsStraight-Through Wiring 100BASE-TX/10BASE-T Pin AssignmentsCrossover Wiring Console Port Pin Assignments Figure B-2. DB-9 Console Port Pin NumbersDB-9 Port Pin Assignments Console Port to 9-Pin COM Port on PCConsole Port to 25-Pin DCE Port on Modem Console Port to 25-Pin DTE Port on PC Cables Appendix C Specifications Physical CharacteristicsPower Supply WeightTemperature Power ConsumptionSwitch Features Management Features Warranty StandardsCompliances Model Slide-in Module1000BASE-SX Extender Module StandardsAppendix D Ordering Information Ordering Information Auto-Negotiation GlossaryGlossary-1 BandwidthGlossary-2 Glossary-3 Glossary-4 Glossary-5 RJ-45 ConnectorSwitched Ports Network DiameterGlossary-6 Index Index-1Index-2 Index-3 Index-4 Page Internet