SMC Networks SMCWPS-G manual Netware Status

Page 37

2.Click TCP/IP, it then as shown in the following picture.

Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server.

IP Address: This option allows you to view IP address from the print server. The IP address must meet the IP addressing requirements of the network segment.

Subnet Mask: This option allows you to view subnet mask from the print server.

Gateway’s IP: This option allows you to view gateway from the print server.

Rendezvous Settings: This option allows you to view the Rendezvous status from the print server.

SMB Workgroup Name and Shared Name: This option allows you to view the SMB status.

Netware Status:

1.Click Status, it then appears the sub-menu.

2.Click Netware it then as shown in the following picture.

36

Image 37
Contents Page Internet Printer Connection and HP WEB Jetadmin Upgrading the Print Server from Unix Through TCP/IP Trademarks All contents are subject to change without prior noticeCopyright FCC Compliance Notice Radio Frequency NoticeWireless Specifications Network configurationProduct Overview Network ManagementBefore you start, you should prepare the following items Components and Features Print serverHardware Installation Wireless Network with Print Server Wired Network with Print ServerNetwork Environment Ad-Hoc PEER-to-PEER Mode Setup Operating Function Remarks System Configuration Solution TablePreparation Supported NetworksComment Installing the PSAdmin and Print Server’s Driver Software InstallationPage Page Page Page Click Add New Printer to launch Windows Add Printer Wizard Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Obtain an IP address from a Dhcp server Properties -TCP/IP OptionsSpecify an IP address This value is optionalReset UpgradeRefresh Uninstalling the PSAdmin on Windows PC Multiple Print Queues ConfigurationProcedure Page Windows NT/2000/XP/2003 IPP OverviewPage System Requirements HP Web JetAdmin OverviewConfirming Installation and Supply Access Installing HP Web JetAdminConfiguring and Modifying a Device Removing HP Web JetAdmin UtilityOverview Using Embedded Web ServerStatus Menu System StatusPrinter Status Wireless Status TCP/IP Status Netware Status NetWare NDS Setting General SettingsNetWare Bindery Setting AppleTalk StatusSnmp Status System Setup Setup MenuRe-type Password Wireless Setup Printer SetupAdvanced Settings Basic SettingsSecurity Settings TCP/IP Setup NetWare Setup Installing Print Server on NetWare 4.x/5.x Snmp Setup Installation ProcedureSelect NCF files options Select Edit AUTOEXEC.NCF file System.sysContact Snmp.snmpEnableAuthenTrapsSystem.sysName System.sysLocationAppleTalk Setup Recommended Setting Up a Macintosh ComputerPage Network Print Monitor IPX/SPX-compatible Protocol Installation TCP/IP Protocol InstallationRestart the computer NetBEUI Protocol Installation Select Printer and Properties Procedure Assigning an IP Address Basic TCP/IP Installation OverviewUse the Network Print Monitor utility Windows NT LPR Port Printing InstallationRun Add Printer Click Add PortRun Add Printer, Click Next Page Page Page Enter /Printer / Make Default Unix InstallationSCO Unix 8.0.0 Caldera Open Unix System V Release 4 UnixRedhat Linux Open Printer ConfigurationPage Printer field, choose Postscript Printer Queue Type field, choose Networked UnixChoose the model of printer and click Forward Done Upgrading Print Server Upgrading the print server from PSAdminUpgrading the print server from Browser Upgrading the print server from Unix Through TCP/IPType tftp print server’s IP address Click Upgrade Done Power Related Problems General Troubleshooting OverviewWindows 95/98/Me/NT/2000/XP/2003 Troubleshooting Print Port Related ProblemsMulti-Segment Frame Type 802.2 Installation Select Control PanelPrint server Reconfiguration Procedure on Windows NT Print Server Reconfiguration Procedure on Windows 95/98/MeMoving the print server to a New Segment TCP/IP Troubleshooting Novell NetWare TroubleshootingMoving Your Computer to a New Segment Page Page Appendix Diagnostic Mode WirelessRendezvous with Mac OS X Click Printer Setup Utility from the bottom toolbox of Mac Page Page SMB Printing with Windows XP Page Page Page Perform a Factory Default Reset Button Reboot the Print serverDhcp client off IP address Question B Frequently Asked QuestionsQuestion C Question E Question DQuestion F Question GPanasonic KX-P6100/6300/6500 Additional Installation InstructionsTesla