SMC Networks SMCWPS-G manual NetBEUI Protocol Installation

Page 54

NetBEUI Protocol Installation

1.Click Start, point to Settings, and select Control Panel.

2.Double click the Network icon.

3.If the NetBEUI is not already installed, click Add.

4.Select Protocol and click Add.

5.Select Microsoft from the Manufacturers list.

6.Select NetBEUI from the Network Protocols box and follow the instructions on the screen.

7.Restart your computer for new settings to take effect.

8.Done.

Note: For more detailed information, please refer to your Microsoft Windows 9X/ME/NT/2000/XP/2003 manuals.

Windows 95/98/Me/NT/2000/XP/2003 manual Installation Procedure

Please perform the steps as follows to ensure a smooth installation:

1.Run Setup from the print server’s NetWare, Win 95/98/Me/NT/2000/XP/2003 Setup diskette

2.The Network Print Monitor for Windows 95/98/Me Setup will then appear. Click Next.

3.A message reading, “Setup is complete. You may add the Network Print Port by using the PSAdmin” will appear. Click OK.

4.Click Start, point to Settings, and select Printers.

5.Double-click the Add Printer icon.

6.Select Local Printer and click Next.

7.Select the appropriate printer manufacturer and printer type and click Next.

8.Select LPT1 and click Next.

9.Type in the Printer Name and click Next.

53

Image 54
Contents Page Internet Printer Connection and HP WEB Jetadmin Upgrading the Print Server from Unix Through TCP/IP Copyright All contents are subject to change without prior noticeTrademarks FCC Compliance Notice Radio Frequency NoticeProduct Overview Network configurationWireless Specifications Network ManagementComponents and Features Print server Before you start, you should prepare the following itemsHardware Installation Wired Network with Print Server Wireless Network with Print ServerNetwork Environment Ad-Hoc PEER-to-PEER Mode Preparation Configuration Solution TableSetup Operating Function Remarks System Supported NetworksComment Software Installation Installing the PSAdmin and Print Server’s DriverPage Page Page Page Click Add New Printer to launch Windows Add Printer Wizard Page Page Page Using PSAdmin Wizard TCP/IP WizardNetWare Wizard Manual Setup Specify an IP address Properties -TCP/IP OptionsObtain an IP address from a Dhcp server This value is optionalUpgrade ResetRefresh Multiple Print Queues Configuration Uninstalling the PSAdmin on Windows PCProcedure Page IPP Overview Windows NT/2000/XP/2003Page HP Web JetAdmin Overview System RequirementsConfiguring and Modifying a Device Installing HP Web JetAdminConfirming Installation and Supply Access Removing HP Web JetAdmin UtilityStatus Menu Using Embedded Web ServerOverview System StatusPrinter Status Wireless Status TCP/IP Status Netware Status NetWare Bindery Setting General SettingsNetWare NDS Setting AppleTalk StatusSnmp Status Setup Menu System SetupRe-type Password Printer Setup Wireless SetupBasic Settings Advanced SettingsSecurity Settings TCP/IP Setup NetWare Setup Installing Print Server on NetWare 4.x/5.x Installation Procedure Snmp SetupSelect NCF files options Select Edit AUTOEXEC.NCF file System.sysName Snmp.snmpEnableAuthenTrapsSystem.sysContact System.sysLocationAppleTalk Setup Setting Up a Macintosh Computer RecommendedPage Network Print Monitor TCP/IP Protocol Installation IPX/SPX-compatible Protocol InstallationRestart the computer NetBEUI Protocol Installation Select Printer and Properties Procedure Basic TCP/IP Installation Overview Assigning an IP AddressRun Add Printer Windows NT LPR Port Printing InstallationUse the Network Print Monitor utility Click Add PortRun Add Printer, Click Next Page Page Page SCO Unix 8.0.0 Caldera Open Unix Unix InstallationEnter /Printer / Make Default System V Release 4 UnixOpen Printer Configuration Redhat LinuxPage Queue Type field, choose Networked Unix Printer field, choose Postscript PrinterChoose the model of printer and click Forward Done Upgrading the print server from PSAdmin Upgrading Print ServerUpgrading the print server from Unix Through TCP/IP Upgrading the print server from BrowserType tftp print server’s IP address Click Upgrade Done General Troubleshooting Overview Power Related ProblemsMulti-Segment Frame Type 802.2 Installation Print Port Related ProblemsWindows 95/98/Me/NT/2000/XP/2003 Troubleshooting Select Control PanelPrint Server Reconfiguration Procedure on Windows 95/98/Me Print server Reconfiguration Procedure on Windows NTMoving the print server to a New Segment Novell NetWare Troubleshooting TCP/IP TroubleshootingMoving Your Computer to a New Segment Page Page Diagnostic Mode Wireless AppendixRendezvous with Mac OS X Click Printer Setup Utility from the bottom toolbox of Mac Page Page SMB Printing with Windows XP Page Page Page Reset Button Reboot the Print server Perform a Factory DefaultDhcp client off IP address Frequently Asked Questions Question BQuestion C Question F Question DQuestion E Question GAdditional Installation Instructions Panasonic KX-P6100/6300/6500Tesla