SMC Networks SMCWPS-G manual Appendix, Diagnostic Mode Wireless

Page 77

Appendix:

Diagnostic Mode (Wireless)

If you have no the twisted-pair cable to configure print server and have problems to configure it on wireless network. Please refer to the following steps:

1.Change the print server to diagnostic mode by switching the DIP switch to DIAG mode.

2.Change your wireless adapter to Ad-hoc mode, and the ESSID: WLAN-PS; Channel: 6

3.Run PSAdmin to discover the print server.

4.Select the wireless print server

5.Select wireless and input the ESSID, Channel, Rates that meet your network environment, then press ok.

76

Image 77

Contents Page Internet Printer Connection and HP WEB Jetadmin Upgrading the Print Server from Unix Through TCP/IP Trademarks All contents are subject to change without prior noticeCopyright FCC Compliance Notice Radio Frequency NoticeWireless Specifications Network configurationProduct Overview Network ManagementBefore you start, you should prepare the following items Components and Features Print serverHardware Installation Network Environment Wired Network with Print ServerWireless Network with Print Server Ad-Hoc PEER-to-PEER Mode Setup Operating Function Remarks System Configuration Solution TablePreparation Supported NetworksComment Installing the PSAdmin and Print Server’s Driver Software InstallationPage Page Page Page Click Add New Printer to launch Windows Add Printer Wizard Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Obtain an IP address from a Dhcp server Properties -TCP/IP OptionsSpecify an IP address This value is optionalRefresh UpgradeReset Procedure Multiple Print Queues ConfigurationUninstalling the PSAdmin on Windows PC Page Windows NT/2000/XP/2003 IPP OverviewPage System Requirements HP Web JetAdmin OverviewConfirming Installation and Supply Access Installing HP Web JetAdminConfiguring and Modifying a Device Removing HP Web JetAdmin UtilityOverview Using Embedded Web ServerStatus Menu System StatusPrinter Status Wireless Status TCP/IP Status Netware Status NetWare NDS Setting General SettingsNetWare Bindery Setting AppleTalk StatusSnmp Status System Setup Setup MenuRe-type Password Wireless Setup Printer SetupSecurity Settings Basic SettingsAdvanced Settings TCP/IP Setup NetWare Setup Installing Print Server on NetWare 4.x/5.x Select NCF files options Select Edit AUTOEXEC.NCF file Installation ProcedureSnmp Setup System.sysContact Snmp.snmpEnableAuthenTrapsSystem.sysName System.sysLocationAppleTalk Setup Recommended Setting Up a Macintosh ComputerPage Network Print Monitor Restart the computer TCP/IP Protocol InstallationIPX/SPX-compatible Protocol Installation NetBEUI Protocol Installation Select Printer and Properties Procedure Assigning an IP Address Basic TCP/IP Installation OverviewUse the Network Print Monitor utility Windows NT LPR Port Printing InstallationRun Add Printer Click Add PortRun Add Printer, Click Next Page Page Page Enter /Printer / Make Default Unix InstallationSCO Unix 8.0.0 Caldera Open Unix System V Release 4 UnixRedhat Linux Open Printer ConfigurationPage Printer field, choose Postscript Printer Queue Type field, choose Networked UnixChoose the model of printer and click Forward Done Upgrading Print Server Upgrading the print server from PSAdminType tftp print server’s IP address Upgrading the print server from Unix Through TCP/IPUpgrading the print server from Browser Click Upgrade Done Power Related Problems General Troubleshooting OverviewWindows 95/98/Me/NT/2000/XP/2003 Troubleshooting Print Port Related ProblemsMulti-Segment Frame Type 802.2 Installation Select Control PanelMoving the print server to a New Segment Print Server Reconfiguration Procedure on Windows 95/98/MePrint server Reconfiguration Procedure on Windows NT Moving Your Computer to a New Segment Novell NetWare Troubleshooting TCP/IP Troubleshooting Page Page Appendix Diagnostic Mode WirelessRendezvous with Mac OS X Click Printer Setup Utility from the bottom toolbox of Mac Page Page SMB Printing with Windows XP Page Page Page Perform a Factory Default Reset Button Reboot the Print serverDhcp client off IP address Question C Frequently Asked QuestionsQuestion B Question E Question DQuestion F Question GPanasonic KX-P6100/6300/6500 Additional Installation InstructionsTesla